[Fix] Canon Selphy CP1300 Printer setup | Driver Download - Canon support

1. Canon Selphy CP1300 How to set up Canon selphy cp1300 printer? Take your Canon selphy cp1300 out of the package. Check for the seal and place the printer on a surface. Collect all the accessories form the printer package. Install the printer driver in your system. Connect your printer with the computer. Open your Canon selphy cp1300 and fit in the ink cartridge. Fill the printer with the required papers. Take out a test printout. Canon Selphy Cp1300 Wireless Setup Canon Selphy Cp1300 Wireless Setup In order to connect your Canon selphy cp1300 with another device, the wireless setup needs to be established. To perform a wireless setup, follow the process given below. Switch on your Canon selphy cp1300. Keep pressing the Wireless button until the indicator light blinks. When the indicator light near the Wireless button shows a blue light, hold the WPS Button on the access point for 2 minutes. Now the WiFi indicator lamp keeps blinking indicating that the printer is searching for the available network. Hold on till the Power lamp and Wifi indicator lamp blink together.

2. The printer has now established a connection. Now the Wireless and power indicator will stop blinking. How To Connect Canon Selphy Cp1300 To Wifi Check if the access point is ready for communication. Remove the memory card from your Canon selphy cp1300. Open the Setting screen. Click on the WiFi settings. Choose the Connection Method Via Wi-Fi Network. Access the Direct Connection. Use the arrow buttons and select WPS Connection. Under the WPS Connection, find PBC Method and click it. Press the access point button. Keep pressing the WPS button for a few seconds. Once the connection to the Access point message is displayed, tap ok. Read more