Know The Best Way To Clean Prescription Glasses With Anti-glare Lenses

1. Know The Best Way To Clean Prescription Glasses With Anti-glare Lenses Prescription safety glasses with anti-glare coating has become common nowadays. The anti-glare coating is a thin microscopically layer that helps to improve glasses performance. Particularly, they are helpful in some instances like a computer user and night driving. This feature also helpful to the people to look into your eyes directly without any hindrance that is created by the reflection. But anyhow the anti-reflect coating needs special care if you need to wear them frequently.

2. Ways to clean your anti-glare coated lenses: By dish wash soap: America Optometric Association states that fingertips, warm water, and dish wash soap are the best way to clean Rx safety glasses. Before cleaning your eyewear, you need a clean and lint-free cloth to dry the lenses after washing them. ü, Don’t use dish wash soap that has lotion or dangerous chemicals like alcohol or ammonia. ü Never touch your lenses with fingertips to clean them, wash away completely all dirt, oil, grim, and lotion from your hands to clean your eyewear. Avoid touching the lenses of your eyewear with unwashed hands. Rinse the anti-glare lenses with water: Keep your designer prescription glasses under lukewarm tap water. Running water will wash away all debris but can damage lenses. don’t try hot water because too much heat will damage the anti-reflected coated eyeglasses. Use a small amount of soap on each lens: Apply a small amount of dish wash soap on each lens, rub them gently and make leather for some time with fingertips in a circular motion. Make sure to clean every corner of the eyewear like earpieces and nose pads where dust and debris can accumulate and damage the eyewear.

3. Rinse all soap on lenses: Hold firmly your glasses under lukewarm water again and wash away all soap suds from frames, lenses, and all other parts of designer Rx eyeglasses. Inspect carefully your glasses to make sure that all soap has removed. Shake-off extra water: Shake off gently your eyewear to remove extra water and take care that glasses from bending while washing. Use a lint-free soft cloth to dry completely the eyeglasses. Never try to use towels or any other kitchen cloths to dry eyewear. These things can cause grease, oil, and dust while cleaning your lenses or might cause scratches. Avoid using dry sheets for drying glasses because these can leave any residue on the lenses of eyeglasses.

4. Develop routine care for your eyeglasses: Clean your eyewear daily in the morning: You should develop a cleaning routine that will prevent oil, dirt, and debris to build up. Because daily cleaning will make easy to maintain your eyewear and definitely will extend its lifespan. Daily care will keep your eyewear new and will lower the risk of eye infection. Keep a specific piece of cloth designated for eyeglasses: Keep a specific piece of cloth for cleaning your ANSI safety glasses and don’t use for other purposes. Clean in detail after every few days so that any accumulated dirt or debris could damage the lenses or frame of your eyewear. It can also damage the anti-glare coating. But make sure to clean them under tap water. Keep a piece of cloth with you if you are away from your home so that you could not use any paper products. That things will cause scratches and will damage your eyewear. Use a spray for anti-glare lenses: Always keep a cleaning solution that should be specified for anti-glare lenses if you are on traveling and you have don’t access any dish wash soap or tap water. Soak them for some time that will remove all dust and debris. Keep a lint-free cloth for cleaning eyeglasses after spraying solution. You must check the label to verify the solution that is suitable for anti-glare lenses.