1 / 7

A Beginner's Guide to Rockspace Extender Setup

To setup your Rockspace wifi extender, use the local web URL re.rockspace.local. Install your Rockspace range extender for your workplace or home and bid farewell to weak connectivity. So, if you want to install the Rockspace Wi-Fi range extender, read on. Here, we will provide simple step-by-step instructions to assist you in completing the re.rockspace.local setup procedure.<br><br>

Lisa85
Download Presentation

A Beginner's Guide to Rockspace Extender Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Beginner's Guide to Rockspace Extender Setup Welcome to the beginner's guide to Rockspace WiFi Extender Setup ! If you're looking to enhance your wireless network's reach and performance effortlessly, you're in the right place. In this guide, we'll walk you through the simple steps to set up your Rockspace WiFi Extender, even if you're new to the world of networking. Say goodbye to spotty connectivity and hello to flawless connectivity!

  2. Step by Step Instructions for rockspace WiFi Extender Setup Using WPS Plug the Rockspace WiFi extender into a power outlet within your router's signal range. Make that the extender's LED lights are solid and not blinking. Your router's WPS LED will flash if you press the WPS button until it stops. Within two minutes, press the WPS button on the Rockspace extender. After successfully connecting to the router, the WPS LED on the extender should become solid. Position the extender between the router and the WiFi dead zone for improved connectivity. Join the WiFi network 'Rockspace_Ext' on your device.

  3. You should enter Re.rockspace.local or the IP address "192.168.10.1" into the address bar of your web browser. Access the Rockspace wifi extender setup page by following the onscreen directions. Select your current WiFi network from the list, then type in the password. The extender will reboot after the setup is complete. Enjoy decreased dead zones and improved WiFi coverage.

  4. Factory Reset Your Rockspace WiFi Extender To reset the Rockspace Extender, follow the following steps: Find the reset button on your Rockspace WiFi Extender. Using a small object like a paperclip, press and hold the reset button for about 10 seconds. Release the reset button once the LED lights on the extender start flashing. Unplug the extender from the power source and wait for a few seconds. Then, plug it back in. Observe the LED lights. They will indicate that the reset process is complete. Access the setup page using the default IP address (e.g., http://192.168.0.1) and set up your extender again.

  5. Connect to the extender's WiFi network, access the setup page, and configure your settings Reconnect your devices to the newly configured extended network. Your Rockspace WiFi Extender is now reset and ready to provide enhanced coverage. If you face any issues, consult the user manual or Rockspace support for assistance. By following these straightforward steps, you've successfully performed a factory reset on your Rockspace WiFi Extender, thereby ensuring a fresh start for your network extension needs. Additionally, this will help resolve any persistent issues you may have encountered.

  6. Rockspace Extender Setup: Firmware Update Updating Firmware for Rockspace Extender Simplified Steps: Connect to your Rockspace Extender's WiFi network on your device. Open a web browser on the linked device (such as Chrome or Firefox). In the address bar, type the extender's default IP address (e.g., http://192.168.0.1) and press Enter. Enter your extender's username and password to access the setup page. Look for a "Firmware Update" or "Software Update" section on the setup page. Click the "Check for Updates" button to see if a new firmware version is available. If an update is found, click the "Download" or "Update" button to initiate the download.

  7. Wait for the download to finish. Duration varies based on your internet speed. After downloading, click "Apply Update" or "Install" to start the update. The extender will automatically update its firmware. Wait until the process finishes and the extender reboots. Once rebooted, log in to the setup page to verify firmware update. Your Rockspace Extender now has the latest firmware, improving its performance and features. If you face any issues, consult the user manual or Rockspace support for guidance. By following these straightforward steps, you'll ensure that your Rockspace Extender's firmware is up to date. Consequently, this will enable optimal performance and functionality for your extended network.

More Related