1 / 5

Rockspace Extender Setup

Utilise the regional web address re.rockspace.local to configure your Rockspace wifi extender. Say goodbye to shaky connectivity by installing a Rockspace range extender in your house or place of business. To install the Rockspace Wi-Fi range extender, continue reading. To help you finish the re.rockspace.local setup process, we'll give you some straightforward, step-by-step instructions here.

Lisa85
Download Presentation

Rockspace Extender Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rockspace Extender Setup The Rockspace extender is a device designed to enhance the range and coverage of your existing Wi- Fi network. With its simple Rockspace extender setup process, it allows you to eliminate dead zones and enjoy a seamless internet experience throughout your home or office. In this guide, we will walk you through the step-by-step process of setting up your Rockspace extender.

  2. The Guide to Rockspace Wifi Extender Setup Unbox the Rockspace extender and plug it into a power outlet. Connect your computer or smartphone to the extender's default Wi-Fi network. Access the extender's configuration page by entering its default IP address in a web browser. Log in using the default credentials and change the admin password. Start the setup wizard and choose your existing Wi-Fi network from the list. Enter your Wi-Fi password to allow the extender to connect to your router. Configure the extended network settings, including SSID and password.

  3. Wait for the extender to restart, then reconnect your devices to the new extended Wi-Fi network. Test the extended network in areas with weak Wi-Fi signals. Fine-tune or troubleshoot any issues if needed, and enjoy the improved Wi-Fi coverage.

  4. Rockspace Extender Reset Process Locate the reset button on the Rockspace extender, usually a small hole labeled "Reset." Use a paperclip or a pin to press and hold the reset button for about 10 seconds. Release the reset button once the power LED starts flashing or the device restarts. The Rockspace extender will reset to its factory default settings. Wait for the extender to fully boot up and initialize. Reconnect your computer or smartphone to the default Wi-Fi network of the extender. Access the extender's configuration page using its default IP address in a web browser. Log in using the default credentials (usually "admin" for both username and password).

  5. Follow the setup wizard to configure the extender again and connect it to your existing Wi-Fi network. Customize the extended network settings as desired and test the improved Wi-Fi coverage. Please note that performing a reset will erase any previous settings and configurations on the Rockspace extender, so be sure to have the necessary information, such as your Wi-Fi network name and password, ready for the setup process after the reset.

More Related