The Ultimate Guide to Victony AC1200 Setup A Step-by-Step Tutorial

1. The Ultimate Guide to Victony AC1200 Setup: A Step-by-Step Tutorial Welcome to our comprehensive tutorial on setting up and using a Victony AC1200 WiFi extender as an access point. Whether you wish to utilise your Victony AC1200 device as an access point or to extend your current WiFi network, we will lead you through the setup process in this post. Both WPS setup and manual configuration techniques will be covered. Let's get started!

2. Victony AC1200 wifi Extender setup Follow these instructions to Setting up Victony AC1200 WiFi extender: The extender should be plugged into a power socket close to your router. Wait for the power LED to turn solid. Connect your device (e.g., laptop or smartphone) to the extender's default WiFi network (usually named "VICTONY-XXX"). Enter "http://ap.setup" or "http://192.168.10.1" in the address bar of a web browser when it has been opened. You'll be directed to the extender's setup page. Click on "Setup Wizard" or "Quick Setup" to begin. The extender will scan for available WiFi networks. Choose your main WiFi network from the list and enter its password when prompted.

3. Optionally, you can set a new network name (SSID) and password for the extended network. Confirm the settings and let the extender apply them. It will reboot during the process. Once rebooted, reconnect your device to the new extended WiFi network. Ensure the extender is placed within your router's WiFi range for optimal performance. Test the connection to ensure the extender is working correctly.

4. Victony AC1200 Extender Setup Using WPS Method To set up the VICTONY AC1200 WiFi extender using the WPS (Wi-Fi Protected Setup) method, follow these steps: Plug the extender into a power outlet near your router and wait for the power LED to turn solid. Locate the WPS button on your router. It is usually labeled "WPS" and may be located on the front or back panel. Press and hold the WPS button on your router for a few seconds (typically 2-3 seconds) until the WPS LED starts blinking. Within 2 minutes of activating the WPS on your router, press the WPS button on the VICTONY AC1200 extender. The extender's WPS LED will begin blinking.

5. The extender will now automatically connect to your router's WiFi network using the WPS settings. This process may take a minute or two. Once the connection is established, the WPS LED on the extender should turn solid, indicating a successful connection. Place the extender in an area where it can effectively extend the WiFi coverage of your network. Connect your devices (e.g., laptops, smartphones) to the extended WiFi network with the same password as your main WiFi network. You're done! The VICTONY AC1200 WiFi extender is now set up and ready to enhance your WiFi coverage using the WPS method