1 / 4

The Ultimate Guide to Victony AC1200 Setup_ A Step-by-Step Tutorial

visit our site for more information

Lisa85
Download Presentation

The Ultimate Guide to Victony AC1200 Setup_ A Step-by-Step Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Ultimate Guide to Victony AC1200 Setup: A Step-by-Step Tutorial Welcome to our detailed tutorial on setting up a Victony AC1200 WiFi extender and using it as an access point. If you wish to expand your current WiFi network or utilise it as an access point, we’ll walk you through the process of configuring your Victony AC1200 device in this post. Both manual configuration methods and WPS setup will be covered. Let’s start now!

  2. Step by Step Tutorial for Manual Victony AC1200 Extender Setup Setting up the Victony AC1200 WiFi range extender manually involves a few steps to ensure a successful connection and extended coverage. Please note that the exact steps might vary slightly based on the specific model and firmware version. Step by step guide how to set up a Victony AC1200 WiFi range extender manually: • Position the Victony AC1200 range extender within the range of your existing WiFi router, ideally halfway between the router and the area where you need better WiFi coverage. • Plug the range extender into an electrical outlet and wait for the LED lights to stabilize. • Connect to Extender: On your device (laptop, smartphone, etc.), search for available WiFi networks and connect to the network named something like “Victony_Extender” or similar. • Open a web browser (e.g., Chrome, Firefox) and type in the IP address 192.168.0.1 or the one mentioned in the setup guide into the address bar. Press Enter.

  3. Within the web interface, search for available WiFi networks and select your home WiFi network from the list. Enter your home WiFi network’s password and click “Apply” or “Connect.” You might have options to customize the extended network’s settings. You can often keep these as default unless you have specific preferences. After the extender restarts, disconnect from the “Victony_Extender” network and reconnect to your newly extended network. Move around the areas where you previously had weak WiFi signal to ensure the extender is providing better coverage.

  4. Victony AC1200 Extender Setup Via WPS method Step by step guide to setting up your Victony AC1200 using the WPS (WiFi Protected Setup) method: • Plug in your Victony AC1200 range extender and make sure it’s powered on. • Locate the WPS button on your Victony AC1200 device. • Press the WPS button on your Victony AC1200 range extender. This will initiate the WPS setup mode. • Within 2 minutes, locate the WPS button on your main router or access point. • On your primary router or access point, press the WPS button. • The two devices will start establishing a connection. • Wait for the WPS LED on your Victony AC1200 to turn solid or indicate a successful connection.It can take one or two seconds to finish. • Once the connection is established, you should have extended WiFi coverage from your Victony AC1200.

More Related