1 / 6

Victony AC1200 extender Setup

If you have any issues with your extender, you can contact our toll-free number( 1-323-471-3045) or Email: support@mywifiextension.net<br>

Lisa85
Download Presentation

Victony AC1200 extender Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Victony AC1200 extender Setup

  2. Victony AC1200 extender Setup With the Victony AC1200 Extender Setup , you’re entering a world of better connectivity! With our cutting-edge extender, you can quickly improve the speed and range of your wireless network. The AC1200 Extender will improve your home or office networking experience. Our technology addresses dead zones, weak connections, and insufficient coverage, resulting in increased connectivity.

  3. Manual Method: Setting up Victony AC1200 Extender Steps by step instruction for Victony AC1200 extender setup: • Connect the extender to a power source. • Please wait until the power LED becomes a steady solid blue. • For about 2 seconds, press and hold the WPS button on the extension. • Pressing and holding the WPS button on the router for around 2 seconds. • The LED lights on the extender will start blinking. • Once the LED lights on the extender turn solid blue, the extender is successfully connected to the router. You have successfully manually configured your Victony AC1200 WiFi extender.

  4. How to Configure Your Victony AC1200 Extender using WPS ? If your extender does not support WPS, you can configure it using a web browser. The following are the necessary steps: • Connect your PC to the extender’s WiFi network. • Open a web browser and type the IP address of the extender in the address bar. The default IP address is 192.168.10.1. • Enter the username and password for the extender. By default, both the username and password are set to “admin”. • Select the “Repeater” mode. • Enter the SSID and password for your WiFi network. • Click on the “Connect” button. You have successfully used WPS to configure your Victony AC1200 extender. Keep in mind that the extender may have additional features accessible via a web interface, so you may want to study those settings to fine-tune your extended network setup as needed.

  5. Factory Resetting the Victony AC1200 Extender To perform a factory reset on your Victony AC1200 extender, you can follow the following basic instructions. • On your Victony AC1200 Extender, locate the reset button. • Ensure that you have turned on the extender and connected it to an electrical outlet. • Press and hold the reset button for around 10 seconds with a tiny, pointed item such as a paperclip. • After holding the reset button, release it. • The extender will restart and revert to its factory settings. • After the reset, you must reconnect the extender to your WiFi network and make any necessary changes. It is important to note that a factory reset will wipe all of the extender’s settings, including the WiFi network name and password. You must reinstall the extender from scratch.

  6. If you facing any issues regarding your extender , you can contact our Professional expert and dial our toll-free number (+1-323-471-3045) or Email: support@mywifiextension.net Thank You

More Related