1 / 7

Pro|Engineer Proficiency Surprise Quiz for Aircraft & Shock Tube Models

This quiz assesses basic Pro|Engineer proficiency with tasks on aircraft wheel and tire design, CEV & SRB model rotation, and shock tube flange modeling. Follow instructions carefully and complete within 1 hour. Remember to save with specified file naming. Grading breakdown provided. Good luck!

Mercy
Download Presentation

Pro|Engineer Proficiency Surprise Quiz for Aircraft & Shock Tube Models

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SURPRISE QUIZ TO ASSESS BASIC PRO|ENGINEER PROFICIENCY Instructions and Comments: • Don’t Stress: If you have been following along in laboratory sessions this quiz is a breeze and probably can be completed in less than 15 minutes • You have 1 hour to complete quiz • Quiz is closed book and closed notes • No internet • No file sharing with classmates Guidelines: • Pay close attention to grading guidelines • Save a single file: LAST_NAME_QUIZ.prt • Grading will be done on the spot

  2. AIRCRAFT WHEEL AND TIRE Bolt Holes Tread Weight Reduction Holes

  3. AIRCRAFT WHEEL AND TIREGRADING BREAKDOWN • Treads: 5 Points • Revolution: 5 Points • Hole: 3 Points • Pattern: 5 Points • Lightening Hole: 3 Points • Pattern: 5 Points • Round: 4 Points • If you did not include your name in file name: -5 Points

  4. CEV & SRB MODEL Ignore these black spots Mini-Thruster port Thruster port SRB section CEV

  5. CEV & SRB MODEL GRADING BREAKDOWN Revolve of CEV & SRB section: 5 pts Create a rotated datum plane for thruster port: 10 pts Create revolved thruster port: 5 pts Extrude mini-thruster port: 2 pts Pattern 4 thruster ports: 5 pts Pattern 4 mini-thruster port: 3 pts If you did not include your name in the file name: -5

  6. SHOCK TUBE FLANGE MODEL Round on flange Flange Pipe Bolt hole Bolt hole chamfer Round on flange *Flange has a hole matching the inside diameter of pipe **Flanges are flat on their bottoms

  7. SHOCK TUBE FLANGE MODEL GRADING BREAKDOWN • Pipe: 3 pts • Flange Revolution: 5 pts • Bolt hole: 5 pts • Pattern: 5 pts • Chamfer in bolt hole: 3 pts • Mirror Flange: 4 pts • Round on flange: 5 pts • If you did not include your name in the file name: -5

More Related