1 / 22

My Mover Matt Brown Spring TX Feb 2009

My Mover Matt Brown Spring TX Feb 2009. Outline. track & wheels motors / battery / electrical drive train options battery size Recharging lighting where to get 12V leds cheap! general construction how to make your mover look like a train smoke stack cow catcher

Mia_John
Download Presentation

My Mover Matt Brown Spring TX Feb 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. My Mover Matt Brown Spring TX Feb 2009

  2. Outline • track & wheels • motors / battery / electrical • drive train options • battery size • Recharging • lighting • where to get 12V leds cheap! • general construction • how to make your mover look like a train • smoke stack • cow catcher • security & safety • making sure your mover is still there the next night • keeping little ones out of harms way or from them harming your mover

  3. Track • Built from plastic lattice – available in the molding section of Lowes/Home Depot • 2 widths used: ¾” & 1 ¾” (8’ lengths) • 5 pieces per rail were laminated together to form a groove • Ties are standard 1x6” treated deck board • Rails attached to ties with gusset plates • Track built in a circle, then cut into two 180° sections

  4. Track

  5. Wheels • Drive wheels are 7” lawnmower wheels from Lowes. One directly attached to motor and the other attached via a lag screw. • Smaller wheels were plastic (intended for robotic use) and attached via a lag screw. These quickly wore out and were replaced with solid rubber caster wheels attached to a steel shaft. • All wheels are attached to a piece of ¼” plywood that rides in the groove.

  6. Wheels Original wheels – attached to trucks with lag screws Drive wheels

  7. New wheels • New wheels are much better! • 2 ½” diameter • Grizzly.com #G7079

  8. Motor • Windshield wiper motor purchased from monsterguts.com • Directly attached to wheel • Wiper motors have two +12V connections: one for high speed, one for low speed, so DC motor controller is not required.

  9. Motor

  10. Battery • Purchased a new 35ah (U1 size) deep-cycle battery on eBay (no taxes, no recycling fees) • Automatic battery charger from Walmart • We removed the battery from the train every night and brought it into the garage for charging. Charged at 4 amp rate. • Sealed AGM batteries are safest and longest lasting, but more expensive. In case of an accident, you don’t want battery acid on your lawn or on the hands of your neighbor’s children.

  11. Schematic

  12. Lighting • Great deals on 12V LEDs at dealextreme.com, however they ship direct from Hong Kong so plan on a long delivery time. Lots of options, so get creative! • Also found battery operated lights that require 4 cells (6V) at Target. Two of these can be wired in series and powered directly from the 12V battery.

  13. Construction • 5-gallon paint bucket for the boiler • PVC pipe and funnel for the smoke stack • Melamine dinner plate for the front of the boiler (yes, I took my measuring tape to HEB and measured the various plates until I found exactly the right size). • Cow-catcher made from tongue depressor sticks from Michaels. • Battery rests in the cab. This is very important! The battery’s weight improves the traction of the drive wheel.

  14. Construction Base Cab attaches to base with 3 screws. Boiler attaches to cab with 1 screw.

  15. Fully Assembled

  16. Security & Safety • When we brought the battery in for the night, we also locked the train to a steel cable wrapped around a tree. • The track was surrounded by rope light suspended from candy canes. This allowed the train to be seen, but kept children from getting too close.

  17. What worked? • Modular construction of engine made it quick to assemble and disassemble. • Direct drive motor was very quiet. • Electrical system was very reliable. • Battery had plenty of capacity and charged reliably • When mechanical problems occurred, the fuse blew, protecting the motor and battery.

  18. What needs improvement • More lights! • Too much friction using grooved track, made worse by tight radius. Plywood that rode in the groove would warp when it got wet. • Lag screws don’t make good axels. • Reduce weight of cars that get pulled. • May continue to use plastic lattice for rails because it makes curves/circles easier, but will use gusset plates on both sides of each rail to limit rail deformation.

  19. Next Year: The Kindla Method Notice the casters that face outward, keeping the train on the track. No grooves. Much less friction.

  20. Dimensions-Front View

  21. Dimensions-Side View

  22. Dimensions-Top View

More Related