1 / 10

Tooling Materials Used In Reaction Injection Molding Factory

The customer can sometimes benefit by combining the best of the old and the new, forming a mix that can often make the difference to a successful outcome. Read more...http://www.honkia.com/services/reaction-injection-molding-factory.html<br>

MissySmile
Download Presentation

Tooling Materials Used In Reaction Injection Molding Factory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tooling Materials Used In Reaction Injection Molding Factory www.honkia.com

  2. Silicone rubbers are used in making Reaction Injection Molding Factory as it is equipped with very low quantities of dimensionally non-critical parts. www.honkia.com

  3. Resin molds are used for components requiring more detail and better physical properties. These urethane and epoxy resin molds are processed with foamed urethane systems. www.honkia.com

  4. One of the advantages of Reaction Injection Molding Factory processed foam is that a high-density skin is formed with a low-density core. www.honkia.com

  5. Spray metal molds offer better control of surface quality and enhanced moldability. This mold-building technique bridges the gap between low-volume prototype and medium production tooling. www.honkia.com

  6. A composite system with an epoxy and aluminum chip mixture acts as the backup structure for the thin metal surface. Aluminum frames are cast to act as a mold base for mounting ejector systems, mix head, side pulls, and to ultimately mount to a production press. www.honkia.com

  7. Aluminum is a must be material to be used because it has the maximum physical properties of the urethane material system. www.honkia.com

  8. A properly cooled aluminum mold is able to control the heat of reaction during the molding process. It is not allow exotherm overrun and hot spot induced internal stresses. www.honkia.com

  9. Contact Us HONKIA PROTOTYPE CO., LIMITEDShenzhen factory :6 Tianyang 7 Road, Datianyang Industrial Park Songgang, Baoan, Shenzhen 518105, China Tel : +86 755 2369 8005 Fax : +86 755 2945 7540 Skype : andy.rapid.prototype Email : info@honkia.comHong Kong address : Unit 2508A, 25/F, Bank of America Tower12 Harcourt Road, Central, Hong Kong www.honkia.com

  10. You can find Reaction injection molding factory in www.honkia.com as they are one of the best manufacturers and providers of such oil refining machine with various specifications. www.honkia.com

More Related