Simple And Easy Tips To Repair Torn Carpet

1. Simple And Easy DIY Tips to Repair Torn Carpet Do you want to fix torn carpet but lack heavy-duty equipment? If yes, then it is time to learn about the simple, at-home way to repair torn carpets. You can fix torn carpet just like professional carpet torn repair services. Let us have a look at the best ways to repair torn carpets efficiently to keep them in their original condition. Carpet Torn Repair Sunshine Coast – Method 1 If you have come across any form of damage to the carpet, be it a pull or a small tear, do not worry! You may be able to save it from further damage. Small rip or pull in the carpet is common, and you can fix torn carpet without even calling professional carpet repair services. Tools required to fix torn carpet: 1.Heat-activated carpet tape 2.Utility knife 3.Seam iron The process for repairing torn carpet Use the utility knife to lift the edges of the seam or rip. If the rip is small, you might need to lengthen it with the utility knife.

2. Remove the old tape from under the rip. Cut the heat-activated tape. Trim the strip long enough to fill the entire lifted carpet edge. Place the tape under the seam and fasten both the seam edges to it. Glide the seam iron into the seam to heat the tape first. Place the seam iron at the bottom edge of the seam to heat the tape. Move the iron to the next section and press the seam edges down to get a result like a professional carpet torn repair Sunshine Coast. After approximately 30 seconds, move the seam iron up about eight inches and immediately press the seam edges into the heated tape. Remove the iron after heating the length of the seam. Make sure you place a protective base to avoid carpet burns. Firmly press down on the seam edges. Ensure that the edges stick firmly to the tape. Carpet Torn Repair Sunshine Coast – Method 2 Mark a circle or square around the rip using a capped pen. Use a sharp carpet knife to cut out the shape. Remove the affected carpet area. Cut the remnant carpet to use as the patch. Make sure that the spare carpet is exactly the same. If there is no remnant carpet, you can take a piece from a well- hidden area, such as the space behind the closet. Cut the fresh carpet. Apply double-sided carpet tape to the patch and carefully place it within the hole.

3. Trim the excess patch area to blend the new patch into the existing area. You can even cut the long carpet fibers to ensure that there is no unevenness on the carpet. Do not disturb the area and let it dry properly. When it comes to caring for the carpet, you can do your best to keep them spotless. But, if you feel that the damage is beyond your control, then hire a professional carpet torn repair Sunshine Coast company to restore it.