1 / 25

King Abdul Aziz University College of Engineering Electrical and Computer Department

King Abdul Aziz University College of Engineering Electrical and Computer Department . EE 454 SWITCHG.& PROT. OF PWR. SYS. Lectures Book Dr. ABDULRAHMAN ALMASOUD. Function Of Industrial Switchgear . Foreword Purpose And Types. Switchgear & Protection. Lecture 2

Olivia
Download Presentation

King Abdul Aziz University College of Engineering Electrical and Computer Department

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. King Abdul Aziz University College of Engineering Electrical and Computer Department EE 454 SWITCHG.& PROT. OF PWR. SYS. Lectures Book Dr. ABDULRAHMAN ALMASOUD

  2. Function Of Industrial Switchgear Foreword Purpose And Types

  3. Switchgear & Protection Lecture 2 System and substation layout: System layout: I- radial feeder. II- parallel feeder. III- ring system. Iv- combination of the past three kinds.

  4. Substation layout Substation layout: Substations usually different in size, construction, cost and complexity according to voltage, location and function. The common feature they have is marshalling of all the associated circuits, through CB, switches on to bus bar as shown Fig (1-2-2A). (From Protection Relaying by Blackburn Page 338) 1-Single bus –single breaker Fig (10.1) 2-Double bus – with bus tie single breaker Fig (10.2) 3-Main & transfer bus – single breaker Fig (10.3) 4-Double bus – single breaker Fig (10.4) 5-Double bus – Double breaker Fig (10.5) 6-Ring bus Fig (10.6) 7-Breaker and a half bus Fig (10.7) 8-Bus and transformer single breaker Fig (10.8)

  5. Function of Substation Introduction:

  6. Functions of Substation Voltage Transformer – function 1 Circuit Switching – function 2 Voltage Regulation – function 3 VAR Control – function 4 System Protection – function5

  7. Design Considerations Safety Simplicity Reliability Maintenance Flexibility

  8. Radial Systems Introduction Simple Radial Systems Expanded Radial Systems Single-Ended Unit Substations

  9. Radial SystemsSimple And Expanded Radial Systems

  10. Radial SystemsSingle-Ended Unit Substations

  11. Loop Systems Primary Loop Systems Secondary Loop Systems

  12. Loop SystemsPrimary Loop Systems

  13. Selective Systems :- Primary selective system

  14. Secondary Selective System :-

More Related