Why is a Wireless Site Survey needed

1. Why is a Wireless Site Survey needed? Resolution Why is a Wireless Site Survey needed?  A Wireless Site Survey is recommended when implementing a wireless network. For larger wireless network deployments, a site survey is a must have item. For smaller wireless deployments, a site survey is good to have but sometimes the cost of the site survey becomes an issue. When deploying a wireless network, we are looking for the optimal wireless coverage and performance with the minimal use of equipment. This saves on time, man power and equipment cost. To get optimal wireless coverage and performance, we need to understand the Radio Frequency (RF) behavior of our wireless network deployment site. A wireless site survey will provide this information by revealing places of signal interferences, places where signals are weaker and areas of no signals (dead zones). A wireless survey also helps to avoid interference due to existing radio sources and interferences cause by physical structures such columns, beams, walls, and metal objects. In fact anything can affect the radio signal profile of a site including furniture and people. It is important to remember that the objective of a wireless site survey is to determine the feasibility of deploying a wireless network to meet your needs and to determine how to deploy a wireless network within the constraints of your site. How does a Wireless Site Survey help?  When deploying a wireless network WiFi access points (APs) are often placed at random but is this add-hoc placement of WiFi APs a good strategy? In small deployments the add-hoc approach is not a problem but with medium to large deployments a wireless site survey is advised and often needed. A wireless site survey helps to determine where to place WiFi APs to avoid interference and avoid overlap coverage from other APs. In practice many network managers just randomly place WiFi APs and simply install extra WiFi APs when extra coverage is needed or when they get complaints about bad WiFi access. In an add-hoc wireless network the network manager has no idea what kind of interference exist and how the site’s radio signal profile changes. By getting a wireless site survey, it will help determine if there are co-channel interferences and how much, where external radio

2. interferences are causing problems and how to minimize the number of WiFi APs needed and where to optimally place the WiFI APs for best coverage. It is important to understand that a wireless site survey is a snap-shot of the site’s radio signal profile at that time. As the site changes with new addition of people, cubicles, furniture, and electronic equipment, its radio signal profile changes and may require a new site survey. What WiFi standards need to be covered in a site survey?  The most common WiFi standards in use include 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac. The 802.11b and 802.11g standards both use the 2.4GHz band and are the most common supported standards. The difference between the two standards is performance with 802.11b supporting 11Mbps and 802.11g supporting 54Mbps. The next important standard is 802.11n supporting both the 2.4GHz and 5GHz band and with increase performance of up to 600Mbps. The newest standard is 802.11ac supporting the 5GHz band and with increase performance of up to 7Gbps. It is important to note that many new low cost personal computers (PCs) and tablets do not support 802.11n or 802.11ac standard. Many companies may have a wide range of WiFi devices and need to support many generations of WiFi devices from 802.11a through 802.11ac and beyond. A site survey needs to cover all WiFi standards used. Do not assume a site survey for one standard is valid for another.