HP Envy 5055 Troubleshooting Guide

1. HP Envy 5055 Troubleshooting Guide Some of the Common 5055 Printer Problems are listed below HP Envy 5055 Reset for Language Turn on the printer. Allow the printer to become idle. Press the back button on the printer’s control panel. Make sure that the 123.hp.com/envy 5055 printer is in the home screen. Press the back button four times, and the printer will go to the Support Menu. In the Support Menu click on the Reset menu by scrolling down using the navigation keys. Select Country/Language and change the settings to your desired one. This will change the printer’s language. HP Envy 5055 Scanning Load a stack of paper into the input tray of the printer by tapping it on a flat surface. The printer driver should be installed for HP Envy 5055 setup to scan documents using this printer. Open the scanner lid and place the document to be scanned on the scanner bed. Align the paper using the guideline on the scanner bed. Open the HP printer software on your computer and click on the scan button. Select the file format in which you want to save the document and click on Save.

2. HP Envy 5055 Printing Too Dark If the printer prints too dark then you have to open the cartridge access door and remove the cartridges form it. Clean the areas around the nozzle of the cartridge and insert the printer back into it. Make sure that you use HP genuine ink cartridges to avoid the damage to the printer. Set a moderate DPI value to reduce the darkness of the print. HP Envy 5055 Wi-Fi Issue If any problem occurs with the connectivity of the printer, then check the wireless light on the 123.hp.com/envy 5055 printer’s control panel. If the wireless light blinks correctly, then check the connectivity lights on the wireless router. If the problem continues to exist, then reset the print environment to solve this issue. How to change language on HP Envy 5055 printer? Language settings can be accessed in two ways for 123.hp.com/envy 5055 setup. One method is by changing the language from the printer, and the other one is by changing it from the printer software. On the printer’ control panel click on the back button and come to the home screen. Press the back button four times to open the Support Menu. Scroll down and select the Language/Region. Change the language to your desired one and select Ok. Following the above steps will help you to change language on HP Envy 5055 setup printer. HP ENVY SCANNER NOT WORKING The scanning error occurs on the computer when a scan gets initiated from the computer. If this problem occurs, the printer driver should be uninstalled and reinstalled again. Download the HP full feature printer software from HP Envy 5055 setup. Follow the guided instructions on our website to install the printer driver correctly to avoid any scanning issues in the future. Place the document on the scanner glass of the printer and test scan a document to check the scanning operation. The issue should have been fixed if the above steps are followed correctly.

3. HP ENVY 5055 CHANGE INK Open the cartridge access door on the printer to change ink in Open configuration options 123.hp.com/envy 5055 setup. Take the cartridge out of its packet and remove the orange protective tapes from it. Make sure that you do not touch the nozzles or the copper-colored contacts on the cartridges. Open the latch on the carriage to access the slots. Insert the cartridge into the slot by facing the nozzle towards the printer. Close the access door after inserting the cartridges into it.