70 likes | 95 Views
Best Washing Machine Repair & Services in Hyderabad at your Home.all essential brands, like Samsung,LG, Electrolux,IFB, whirlpool, Videocon, Godrej,dynaxy, Bosch, and any location home service available.
E N D
Machine won’t start Possible reasons and solutions : The machine isn’t plugged in, or the electrical wires, socket, or plug are damaged; you haven’t closed the door properly or the door is damaged; you haven’t entered the program selection in the right way. For more detailed information and advice, check out our article on
Drum won’t fill with water Possible reasons and solutions : The water supply hoses aren’t connected properly, are bent, blocked or leaking; the water supply is not turned on, the tap is faulty, or there’s not enough water pressure; the filter is blocked.Get more detailed information and advice from the Experts
Washing machine doesn’t spin Possible reasons and solutions : If the drum doesn’t rotate at all during the wash, it is likely to be due to a damaged or slipped drive belt or worn out carbon brushes on the motor this will require specialist technical assistance.In a fully automatic machine, if the drum doesn’t spin at the end of a cycle it may be overloaded, or something might be preventing the drum from draining fast enough.
Drum won’t drain Possible reasons and solutions : A blockage in the machine or waste water pipe; an electrical fault; or problems with the pump. For front-loading machines, check to see if you have a draining tube connected to the pump filter at the front of your machine – you can use this to empty the water. If not, remove the waste water hose from your plumbing and empty it into a bowl. Unplug top-loading machines and empty the water by hand.
Machine seems to be full of foam Possible reasons and solutions : You’re most likely using too much or too little detergent, and the amount needs to be adjusted according to whether you live in a soft or hard water area. Soft water and too much detergent will cause lots of bubbles! Many new washing machines, like this model from IFB, now have foam control systems built in.
Door is jammed shut Possible reasons and solutions : This is one problem that you should get a professional to fix.it’s likely you’ll need to replace faulty or damaged door parts.On front-loading machines, jammed doors should be opened from the inside, rather than being forced open from outside. You should never open the inner workings of the machine yourself.