1 / 23

Wearable Sensors

Wearable Sensors. Final Presentation 05-10-04. Problem Background. MIT Research Affective Wearable Computers. Inferred Transmission (short range) Bulky Design, hard to wear 20 Samples per second. Goals and Objectives. To create a wearable device that reads

RoyLauris
Download Presentation

Wearable Sensors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wearable Sensors Final Presentation 05-10-04

  2. Problem Background MIT Research Affective Wearable Computers • Inferred Transmission (short range) • Bulky Design, hard to wear • 20 Samples per second

  3. Goals and Objectives To create a wearable device that reads temperature, skin conductance, and blood volume pulse and transmits data wirelessly to a computer, where it will be displayed in real time.

  4. Expected Product Layout Blood Volume Pulse (BVP) Lapaic Wireless Transmitter Temperature Galvanic Skin Conductor Transmission Board Team Sensors Team Lapaic Wireless Receiver GUI Microcontroller Software Team

  5. Team Overview • Sensors Team • Phillip Hay • Rosy Logioia • Gouri Shintri • Transmission / Microcontroller Board Team • Christina Hernandez • Clayton Smith • Adam Stevenson • Software Team • Daniel Bishop • Josh Handley

  6. Sensors BVP Detection and Filtering BVP Subtraction and Offsetting Temperature Galvanic Skin Conductance

  7. Sensors (Design Specs) • Strengths • Compact • Wearable • Low power • Weaknesses • Poor quality board and parts • Sensitive signals • Inconsistent signals (BVP)

  8. Transmission Board Layout PCB Layout Schematic

  9. Transmission Board (Design Specs) • Strengths • Size (1.8” square) • Potential wireless transceiver and microcontroller on same board • Weaknesses • Wasted space where Chipcon was originally soldered onto board • Separate transceiver / microcontroller boards

  10. Software Overview Divided into 2 programs that run concurrently: • Cygnal microcontroller • PC: The Wearable Sensor Display Utility (WeaSeL) • Connected through a USB Connection

  11. Microcontroller Software Microcontroller Code: • Interrupt Driven • Polls data from A/D converter every X seconds. • Transmits it to PC via USB using a custom packet protocol.

  12. MCU to Computer USB Connection • Used to connect the microcontroller to the computer • The device uses a simple FIFO interface • The high data speed rate coupled with a ~64k byte buffer on the computer, allows for our sensor technology to quickly send large amounts of data points to the computer for processing • The device is powered by the computer through the USB connection and therefore no additional power constraints are added to the project From: http://www.dlpdesign.com/usb/

  13. Microcontroller / USB Connection(Design Specs) • Strengths • C-based IDE • Interrupt Driven • No wasted clock cycles • Easier to maintain code • USB • High Data Rate • Built in Buffering System • Easy to integrate w/ .NET C# • 1.1 Compliant • Weaknesses • Microcontroller clock somewhat erratic • ADC has some spill over

  14. WeaSeL • Reads data from the USB port • “Real time” display of sensor readings, similar to oscilloscope • Can save readings to a file for future comparison

  15. WeaSeL(Design Specs) • Strengths • Easy to visualize changes in data • User-friendly • Weaknesses • USB buffering may cause WeaSeL to lag or stall

  16. Final Product Layout Blood Volume Pulse (BVP) GUI Temperature Microcontroller Galvanic Skin Conductor Lapaic Wireless Transmitter Software Team Sensors Team Transmission / Microcontroller Board Team Lapaic Wireless Receiver

  17. Project Status • Due to lack of time and equipment, our team was not able to complete wireless transmission of data. • The transmission code is currently being reviewed by Laipac Corporation.

  18. Project Integration Sensor board hooked up to user and microcontroller Microcontroller on evaluation board hooked up to USB

  19. Team Management Issues • Schedule Conflicts • Areas of Expertise • Time Management (other classes, work, graduation, etc) Resolving the Issues • Communication • Division of Work • Weekly Team Meetings

  20. Budget

  21. Engineering Standards and Safety • Easy to produce because of availability of parts • Product is for medical purposes • Product is powered by batteries at low voltage • Batteries must be disposed of properly to prevent environmental harm

  22. Project Sponsors This project was completed with the help of the Computer Science Department at Texas A&M University, especially Dr. Ricardo Gutierrez, Dr. Steve Liu, and Dr. Cote from the Biomedical Engineering Department. The project was financially sponsored by Applied Materials and the National Science Foundation.

  23. Demonstration – Double-click to Play

More Related