Preparations To Be Done Before Car Paint Application

1. Preparations to Be Done Before Car Paint Application If you are thinking about DIY car painting, one thing that you need to know is that it’s going to be very tough. The reason is that it demands expertise, prevision, patience and most importantly, some preparations in advance that are not known to everyone. These preparations include several things and some steps to be taken are discussed in this post. Step#1 Cutting What What Is Cutting Is Cutting? ? This task involves using an abrasive compound to remove thin layers of paint. According to the experts, you need to carry out this cutting as a preparation before you could initiate any step towards car painting. Different kinds of compounds can be brought into use and therefore, it is important that you research and pick the one that suits the paint present on your vehicle.

2. Steps Steps Taken Taken in in The Process The Process of of Cutting Cutting Before applying the cutting compound, tape the surrounding areas and this is really mandatory, if you are using machine for this application. You need to wear protective clothes, a mask, protective eyewear, gloves and cover every other thing that you don’t want to clean afterwards. You need to apply this compound in a circular motion using a clean cloth. You need to be consistent with the pressure and check after every few inches to make sure that the things are going your way. Always take care to move the compound around; spending too long in one area can heat up the paint and burn it, creating more damage.

3. Step#2 Sanding What What Is Is Sanding Sanding? ? This process is exercised to remove the top layer of the car paint and for this; abrasive materials are brought into use. Experts consider it as one of the most important steps as this would also play its part later in the paint protection too. Therefore, you need to get it done by the professionals who can guarantee 100 percent flawless results. The task of sanding could be carried out using sandpaper or using an electrical orbital sander. In case of sandpaper, you will have to use different grades of paper depending on the task. How How to to Sand Sand? ? The first step is picking the right sandpaper and experts recommend using 1200 grit paper or sanding pads for faster and more "pleasant to the eyes" results. By applying primer and exposing bare metal, you can prevent the headache of matching the paint that you want to apply to the existing car paint.

4. During the process of sanding, make sure that there are no glossy spots present on the vehicle’s body. This is important as on the gloss spots, primer would be totally ineffective. This might be a back-breaking task, but experts recommend it as a really important one for the highest quality results. Step#3 Priming What What Is Priming? Is Priming? The main motive behind priming is to seal the surface and create a protective layer over it. It is because of priming that an ideal surface is created for the car paint to stick on. Buying high build primers is recommended as they contain high solids which help by smoothening any imperfections on the bare metal. Source url: http://cameronamelia.soup.io/post/634438937/Tips-For- Proper-Maintenance-Of-Air-Compressors