1 / 2

Mounting Installation for new or Existed Countertop

Check out this pdf to get the complete details on the assembly of new or existing countertop support in your kitchen and bar applications. For further details, to DIY, visit: http://www.remodelmarket.com/Countertop-Supports-and-Bar-Brackets-s/1884.htm

SaniaBaker
Download Presentation

Mounting Installation for new or Existed Countertop

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. REMODEL MARKET Home Improvement Made Easy Countertop Support Mounting Instructions (Mounting prior to countertop installation) 1) Determine where support brackets are to be located. 2) For maximum strength, locate brackets over stud or frame. 3) Determine distance between Keyslots (A) on back of support. 4) Measure from top of narrow slot (B) on upper keyslot to top of narrow slot (C) on lower keyslot (spacing). 5) Measure from top edge of Countertop Support (D) to top edge of upper keyslot opening (B) (offset). 6) Mark offset and spacing locations where Countertop Supports are to be located. 7) Install screws (#8 x 2" minimum) at marked locations, do not fully tighten. 8) Leave 1/8" of screw protruding from surface to allow for bracket engagement. 9) Allign Keyslots over screw heads and slide Countertop Support down. 10) Countertop Support should be snug against mounting surface. 11) If support is not snug, remove support and tighten screws slightly and reattach. 12) Adjust screws until a snug fit is achieved. 13) Install Counter. (D)\ Upper Lower

  2. REMODEL MARKET Home Improvement Made Easy Countertop Support Mounting Instructions (Mounting under existing countertop) 1) Determine where support brackets are to be located. 2) For maximum strength, locate brackets over stud or frame. 3) Remove existing Keyslot Brackets (A) from back of Countertop Support. 4) Turn Keyslot Brackets upside down and reinstall into back of Countertop Support. 5) Determine distance between Keyslots on back of support. 6) Measure from top of keyslot opening (B) on upper keyslot to top of keyslot opening (C) on lower keyslot (spacing). 7) Measure from top edge of Countertop Support (D) to bottom edge of upper keyslot opening (E) (offset). 8) Mark offset and spacing locations where Countertop Supports are to be located. 9) Install screws (#8 x 2" minimum) at marked locations, do not fully tighten. 10) Leave 1 /8" of screw protruding from surface to allow for bracket engagement. 11) Allign Keyslots over screw heads and slide Countertop Support up. 12) Countertop Support should be snug against mounting surface. 13) If support is not snug, remove support and tighten screws slightly and reattach. 14) Adjust screws until a snug fit is achieved. 15) Remove Countertop Support. 16) Apply bead of construction adhesive to top and back of Countertop Support. 17) Reinstall Countertop Support. 17) Install Counter. L (D) r ~ 1 :(t)_. 1 (8)----+-....,..... ( E ) - - - - - + - ~ (A) ~ Upper Lower

More Related