Windshield wiper installation

1. The know-how on wiper installation that can help you Are you a travel blogger on a car? Or adventurous and like to drive a long distance during your holidays and weekends? Then you must be very particular about your car windshield wiper. This small-looking device has always been a 'friend in need’. For a long drive, you need to have all the features of your car in active condition so that you do not land up into trouble in the middle of your trip. So it is always advisable that for a safe trip you must have some technical idea so that you can handle small troubleshooting. Having some technical knowledge of windshield wiper installation is essential. This process does not require tools and could be done using both of our hands only. All we need is to pull back the arm and spin around so that the blades become visible. The arms are supposed to hold themselves under the spring tension and will allow us to switch out the blades easily. The following steps are to be followed to get the installation done smoothly. First Step: We need to make sure that we have got the right replacement blades for the car. Second Step: Clean your screen. Third Step: Take a towel or a piece of clean cloth. Fourth Step: Lift and spin around the wiper blades. Fifth Step: Remove the old blades using both your hands by sliding out. Sixth Step: Clip the new blades in carefully. The installation process is similar or identical to most of the vehicles on the road. The rubber blades can always be used in these wipers but they are sometimes very tricky to install and often do not work well. There could be different types and sizes of wipers, so it is always advisable to speak to the auto spare dealers who deal with these spares. But silicon-made wiper blades work more smoothly and efficiently than rubber blades. No tricky effort is required for installing silicon blades.