Download
1 / 32
330 likes | 602 Views
Data and Computer Communications. Chapter 12 – Routing in Switched Networks. Eighth Edition by William Stallings Lecture slides by Lawrie Brown. Routing in Switched Networks.
E N D
Data and Computer Communications Chapter 12 – Routing in Switched Networks Eighth Edition by William Stallings Lecture slides by Lawrie Brown
Routing in Switched Networks "I tell you," went on Syme with passion, "that every time a train comes in I feel that it has broken past batteries of besiegers, and that man has won a battle against chaos. You say contemptuously that when one has left Sloane Square one must come to Victoria. I say that one might do a thousand things instead, and that whenever I really come there I have the sense of hairbreadth escape. And when I hear the guard shout out the word 'Victoria', it is not an unmeaning word. It is to me the cry of a herald announcing conquest. It is to me indeed 'Victoria'; it is the victory of Adam." —The Man Who Was Thursday, G.K. Chesterton
Routing in Packet Switched Network • key design issue for (packet) switched networks • select route across network between end nodes • characteristics required: • correctness • simplicity • robustness • stability • fairness • optimality • efficiency
Performance Criteria • used for selection of route • simplest is “minimum hop” • can be generalized as “least cost”
Decision Time and Place • time • packet or virtual circuit basis • fixed or dynamically changing • place • distributed - made by each node • centralized • source
Network Information Source and Update Timing • routing decisions usually based on knowledge of network (not always) • distributed routing • using local knowledge, info from adjacent nodes, info from all nodes on a potential route • central routing • collect info from all nodes • issue of update timing • when is network info held by nodes updated • fixed - never updated • adaptive - regular updates
Routing Strategies - Fixed Routing • use a single permanent route for each source to destination pair • determined using a least cost algorithm • route is fixed • at least until a change in network topology • hence cannot respond to traffic changes • advantage is simplicity • disadvantage is lack of flexibility
Routing Strategies - Flooding • packet sent by node to every neighbor • eventually multiple copies arrive at destination • no network info required • each packet is uniquely numbered so duplicates can be discarded • need some way to limit incessant retransmission • nodes can remember packets already forwarded to keep network load in bounds • or include a hop count in packets
Properties of Flooding • all possible routes are tried • very robust • at least one packet will have taken minimum hop count route • can be used to set up virtual circuit • all nodes are visited • useful to distribute information (eg. routing) • disadvantage is high traffic load generated
Routing Strategies - Random Routing • simplicity of flooding with much less load • node selects one outgoing path for retransmission of incoming packet • selection can be random or round robin • a refinement is to select outgoing path based on probability calculation • no network info needed • but a random route is typically neither least cost nor minimum hop
Routing Strategies - Adaptive Routing • used by almost all packet switching networks • routing decisions change as conditions on the network change due to failure or congestion • requires info about network • disadvantages: • decisions more complex • tradeoff between quality of network info and overhead • reacting too quickly can cause oscillation • reacting too slowly means info may be irrelevant
Adaptive Routing - Advantages • improved performance • aid congestion control • but since is a complex system, may not realize theoretical benefits • cf. outages on many packet-switched nets
Classification of Adaptive Routing Startegies • based on information sources • local (isolated) • route to outgoing link with shortest queue • can include bias for each destination • Rarely used - does not make use of available info • adjacent nodes • takes advantage on delay / outage info • distributed or centralized • all nodes • like adjacent
ARPANET Routing Strategies1st Generation • 1969 • distributed adaptive using estimated delay • queue length used as estimate of delay • using Bellman-Ford algorithm • node exchanges delay vector with neighbors • update routing table based on incoming info • problems: • doesn't consider line speed, just queue length • queue length not a good measurement of delay • responds slowly to congestion
ARPANET Routing Strategies2nd Generation • 1979 • distributed adaptive using measured delay • using timestamps of arrival, departure & ACK times • recomputes average delays every 10secs • any changes are flooded to all other nodes • recompute routing using Dijkstra’s algorithm • good under light and medium loads • under heavy loads, little correlation between reported delays and those experienced
ARPANET Routing Strategies3rd Generation • 1987 • link cost calculations changed • to damp routing oscillations • and reduce routing overhead • measure average delay over last 10 secs and transform into link utilization estimate • normalize this based on current value and previous results • set link cost as function of average utilization
Least Cost Algorithms • basis for routing decisions • can minimize hop with each link cost 1 • or have link value inversely proportional to capacity • defines cost of path between two nodes as sum of costs of links traversed • in network of nodes connected by bi-directional links • where each link has a cost in each direction • for each pair of nodes, find path with least cost • link costs in different directions may be different • alternatives: Dijkstra or Bellman-Ford algorithms
Dijkstra’s Algorithm • finds shortest paths from given source node s to all other nodes • by developing paths in order of increasing path length • algorithm runs in stages (next slide) • each time adding node with next shortest path • algorithm terminates when all nodes processed by algorithm (in set T)
Dijkstra’s Algorithm Method • Step 1 [Initialization] • T = {s} Set of nodes so far incorporated • L(n) = w(s, n) for n ≠ s • initial path costs to neighboring nodes are simply link costs • Step 2[Get Next Node] • find neighboring node not in T with least-cost path from s • incorporate node into T • also incorporate the edge that is incident on that node and a node in T that contributes to the path • Step 3[Update Least-Cost Paths] • L(n) = min[L(n), L(x) + w(x, n)]for all nÏ T • if latter term is minimum, path from s to n is path from s to x concatenated with edge from x to n
Bellman-Ford Algorithm • find shortest paths from given node subject to constraint that paths contain at most one link • find the shortest paths with a constraint of paths of at most two links • and so on
Bellman-Ford Algorithm • step 1 [Initialization] • L0(n) = , for all n s • Lh(s) = 0, for all h • step 2 [Update] • for each successive h 0 • for each n ≠ s, compute: Lh+1(n)=minj[Lh(j)+w(j,n)] • connect n with predecessor node j that gives min • eliminate any connection of n with different predecessor node formed during an earlier iteration • path from s to n terminates with link from j to n
Comparison • results from two algorithms agree • Bellman-Ford • calculation for node n needs link cost to neighbouring nodes plus total cost to each neighbour from s • each node can maintain set of costs and paths for every other node • can exchange information with direct neighbors • can update costs and paths based on information from neighbors and knowledge of link costs • Dijkstra • each node needs complete topology • must know link costs of all links in network • must exchange information with all other nodes
Evaluation • dependent on • processing time of algorithms • amount of information required from other nodes • implementation specific • both converge under static topology and costs • both converge to same solution • if link costs change, algs attempt to catch up • if link costs depend on traffic, which depends on routes chosen, may have feedback instability
Summary • routing in packet-switched networks • routing strategies • fixed, flooding, random,adaptive • ARPAnet examples • least-cost algorithms • Dijkstra, Bellman-Ford
