30 likes | 45 Views
Bentonite is a hydrated clay mineral, consisting predominantly of smectite minerals, usually montmorillonite. Natural Bentonites are mostly in light blue, maroon, and grayish black. HCmilling (Guilin Hongcheng) Grinding mill has an outstanding value in Bentonite grinding, which can grind bentonite with defined grain size ,it is widely used in foundry sand, drilling mud, metallurgical pellets, oil decolorization and other industries.
E N D
Bentonite Grinding Mill Maintenance Guide Bentonite is a hydrated clay mineral, consisting predominantly of smectite minerals, usually montmorillonite. Natural Bentonites are mostly in light blue, maroon, and grayish black. HCmilling (Guilin Hongcheng) Grinding mill has an outstanding value in Bentonite grinding, which can grind bentonite with defined grain size ,it is widely used in foundry sand, drilling mud, metallurgical pellets, oil decolorization and other industries. As a large-scale processing machine with complicated working conditions, there are different degrees of damage during the process of working which requires the technician to pay great attention to the maintenance of the bentonite grinding in usual
to keep a good operating state and create more market value . Hong Cheng group has summarized the of maintenance of a bentonite grinding mill as below for sharing. Adjustment of parameters. Firstly, pay attention to adjust the wind volume during long-term operation, the wind volume control valve is on the wind intake pipe of the fan.Adjusting to the proper position according to the fineness and output requirements. While you need to adjust the wind volume control that on the flue gas vent pipe to inlet position without dust spray. Thus the small wind volume will help high fineness of the bentonite, please note the wind should not be too small. Adjustment of the fineness The analyzer above the bentonite grinding mill should be adjusted according to the fineness degree of the bentonite. When the rotation speed is high, the fineness will be also high.As a result, the output will be decreased when fineness is increased, while this can further satisfy the needs of further fine powder. Replacement of grinder roller and ring Grinder roller and ring are main part of the equipment, the replacement or scrapping will affect the whole performance of the bentonite roller mil. It is generally believed that when the remaining wall thickness of the grinding roller and ring is less than 10 mm, we can scrap them and replace with new parts to let it run well. Please avoid
putting any metal block into the machine as it will damage the grinding roller and the grinding ring . To find out more bentonite roller mill solutions please visit or contact: www.hcmilling.com Whatsapp: +86-15907886157 (Vera) Tel: +86-773-3568321 Email: hcmkt@hcmilling.com