1 / 35

Chapter 5

Chapter 5. Fundamentals of Frequency Modulation. Topics Covered in Chapter 5. 5-1: Basic Principles of Frequency Modulation 5-2: Principles of Phase Modulation 5-3: Modulation Index and Sidebands 5-4: Noise-Suppression Effects of FM 5-5: Frequency Modulation Versus Amplitude Modulation.

abbott
Download Presentation

Chapter 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 5 Fundamentals of Frequency Modulation

  2. Topics Covered in Chapter 5 • 5-1: Basic Principles of Frequency Modulation • 5-2: Principles of Phase Modulation • 5-3: Modulation Index and Sidebands • 5-4: Noise-Suppression Effects of FM • 5-5: Frequency Modulation Versus Amplitude Modulation

  3. 5-1: Basic Principles of Frequency Modulation • A sine wave carrier can be modified for the purpose of transmitting information from one place to another by varying its frequency. This is known as frequency modulation (FM). • In FM, the carrier amplitude remains constant and the carrier frequency is changed by the modulating signal.

  4. 5-1: Basic Principles of Frequency Modulation • As the amplitude of the information signal varies, the carrier frequency shifts proportionately. • As the modulating signal amplitude increases, the carrier frequency increases. • With no modulation the carrier is at its normal center or resting frequency.

  5. 5-1: Basic Principles of Frequency Modulation • Frequency deviation(fd) is the amount of change in carrier frequency produced by the modulating signal. • The frequency deviation rate is how many times per second the carrier frequency deviates above or below its center frequency. • The frequency of the modulating signal determines the frequency deviation rate. • A type of modulation called frequency-shift keying (FSK) is used in transmission of binary data in digital cell phones and low-speed computer modems.

  6. 5-1: Basic Principles of Frequency Modulation Figure 5-1: FM and PM signals. The carrier is drawn as a triangular wave for simplicity, but in practice it is a sine wave. (a) Carrier. (b) Modulating signal. (c) FM signal. (d) PM signal.

  7. 5-2: Principles of Phase Modulation • When the amount of phase shift of a constant-frequency carrier is varied in accordance with a modulating signal, the resulting output is a phase-modulation (PM) signal. • Phase modulators produce a phase shift which is a time separation between two sine waves of the same frequency. • The greater the amplitude of the modulating signal, the greater the phase shift.

  8. 5-2: Principles of Phase Modulation • The maximum frequency deviation produced by a phase modulator occurs during the time that the modulating signal is changing at its most rapid rate.

  9. 5-2: Principles of Phase Modulation Figure 5-3: A frequency shift occurs in PM only when the modulating signal amplitude varies. (a) Modulating signal. (b) FM signal. (c) PM signal.

  10. 5-2: Principles of Phase Modulation Relationship between the Modulating Signal and Carrier Deviation • In FM and in PM, the frequency deviation is directly proportional to the amplitude of the modulating signal. • In PM, the maximum amount of leading or lagging phase shift occurs at the peak amplitudes of the modulating signal. • In PM the carrier deviation is proportional to both the modulating frequency and the amplitude.

  11. 5-2: Principles of Phase Modulation Figure 5-4: Frequency deviation as a function of (a) modulating signal amplitude and (b) modulating signal frequency.

  12. 5-2: Principles of Phase Modulation Converting PM into FM • In order to make PM compatible with FM, the deviation produced by frequency variations in the modulating signal must be compensated for. • This compensation can be accomplished by passing the intelligence signal through a low-pass RC network. • This RC low-pass filter is called a frequency-correcting network, predistorter, or 1/f filter and causes the higher modulating frequencies to be attenuated. • The FM produced by a phase modulator is called indirect FM.

  13. 5-2: Principles of Phase Modulation Phase-Shift Keying • The process of phase modulating a carrier with binary data is called phase-shift keying (PSK) or binary phase-shift keying (BPSK). • The PSK signal has a constant frequency, but the phase of the signal from some reference changes as the binary modulating signal occurs.

  14. 5-2: Principles of Phase Modulation Figure 5-6: Phase modulation of a carrier by binary data produces PSK.

  15. 5-3: Modulation Index and Sidebands • Any modulation process produces sidebands. • When a constant-frequency sine wave modulates a carrier, two side frequencies are produced. • Side frequencies are the sum and difference of the carrier and modulating frequency. • The bandwidth of an FM signal is usually much wider than that of an AM signal with the same modulating signal.

  16. 5-3: Modulation Index and Sidebands Modulation Index • The ratio of the frequency deviation to the modulating frequency is known as the modulation index(mf). • In most communication systems using FM, maximum limits are put on both the frequency deviation and the modulating frequency. • In standard FM broadcasting, the maximum permitted frequency deviation is 75 kHz and the maximum permitted modulating frequency is 15 kHz. • The modulation index for standard FM broadcasting is therefore 5.

  17. 5-3: Modulation Index and Sidebands Bessel Functions • The equation that expresses the phase angle in terms of the sine wave modulating signal is solved with a complex mathematical process known as Bessel functions. • Bessel coefficients are widely available and it is not necessary to memorize or calculate them.

  18. 5-3: Modulation Index and Sidebands Figure 5-8: Carrier and sideband amplitudes for different modulation indexes of FM signals based on the Bessel functions.

  19. 5-3: Modulation Index and Sidebands Figure 5-9:Plot of the Bessel function data from Fig. 5-8.

  20. 5-3: Modulation Index and Sidebands Bessel Functions • The symbol ! means factorial. This tells you to multiply all integers from 1 through the number to which the symbol is attached. (e.g. 5! Means 1 × 2 × 3 × 4 × 5 = 120) • Narrowband FM (NBFM) is any FM system in which the modulation index is less than π/2 = 1.57, or mf < π /2. • NBFM is widely used in communication. It conserves spectrum space at the expense of the signal-to-noise ratio.

  21. 5-3: Modulation Index and Sidebands FM Signal Bandwidth • The higher the modulation index in FM, the greater the number of significant sidebands and the wider the bandwidth of the signal. • When spectrum conservation is necessary, the bandwidth of an FM signal can be restricted by putting an upper limit on the modulation index.

  22. 5-3: Modulation Index and Sidebands FM Signal Bandwidth • Example: If the highest modulating frequency is 3 kHz and the maximum deviation is 6 kHz, what is the modulation index? mf = 6 kHz/3 kHz = 2 What is the bandwidth? BW = 2fmN Where N is the number of significant* sidebands BW = 2(3 kHz)(4) = 24 kHz *Significant sidebands are those that have an amplitude of greater than 1% (.01) in the Bessel table.

  23. 5-4: Noise-Suppression Effects of FM • Noise is interference generated by lightning, motors, automotive ignition systems, and power line switching that produces transient signals. • Noise is typically narrow spikes of voltage with high frequencies. • Noise (voltage spikes) add to a signal and interfere with it. • Some noise completely obliterates signal information.

  24. 5-4: Noise-Suppression Effects of FM • FM signals have a constant modulated carrier amplitude. • FM receivers contain limiter circuits that deliberately restrict the amplitude of the received signal. • Any amplitude variations occurring on the FM signal are effectively clipped by limiter circuits. • This amplitude clipping does not affect the information content of the FM signal, since it is contained solely within the frequency variations of the carrier.

  25. 5-4: Noise-Suppression Effects of FM Figure 5-11: An FM signal with noise.

  26. 5-4: Noise-Suppression Effects of FM Preemphasis • Noise can interfere with an FM signal and particularly with the high-frequency components of the modulating signal. • Noise is primarily sharp spikes of energy and contains a lot of harmonics and other high-frequency components. • To overcome high-frequency noise, a technique known as preemphasis is used. • A simple high-pass filter can serve as a transmitter’s pre-emphasis circuit. • Pre-emphasis provides more amplification of only high-frequency components.

  27. 5-4: Noise-Suppression Effects of FM Figure 5-13 Preemphasis and deemphasis. (a) Preemphasis circuit.

  28. 5-4: Noise-Suppression Effects of FM Preemphasis • A simple low-pass filter can operate as a deemphasis circuit in a receiver. • A deemphasis circuit returns the frequency response to its normal flat level. • The combined effect of preemphasis and deemphasis is to increase the signal-to-noise ratio for the high-frequency components during transmission so that they will be stronger and not masked by noise.

  29. 5-4: Noise-Suppression Effects of FM Figure 5-13 Preemphasis and deemphasis. (c) Deemphasis circuit.

  30. 5-5: Frequency Modulation Versus Amplitude Modulation Advantages of FM • FM typically offers some significant benefits over AM. • FM has superior immunity to noise, made possible by clipper limiter circuits in the receiver. • In FM, interfering signals on the same frequency are rejected. This is known as the capture effect. • FM signals have a constant amplitude and there is no need to use linear amplifiers to increase power levels. This increases transmitter efficiency.

  31. 5-5: Frequency Modulation Versus Amplitude Modulation Disadvantages of FM • FM uses considerably more frequency spectrum space. • FM has used more complex circuitry for modulation and demodulation. • In the past, the circuits used for frequency modulation and demodulation involved were complex. With the proliferation of ICs, complex circuitry used in FM has all but disappeared. ICs are inexpensive and easy to use. FM and PM have become the most widely used modulation method in electronic communication today.

  32. 5-5: Frequency Modulation Versus Amplitude Modulation Major applications of AM and FM

  33. Exercises • 1. The AM broadcast band consists of 107 channels for stations 10kHz wide. The maximum permitted modulating frequency is 5kHz. Analyze whether FM could be used on this band? • The FM radio broadcast band is allocated the frequency spectrum from 88 to 108 MHz. There are 100 channels spaced 200kHz apart. The first channel center frequency is 88.1 MHz; the last or 100th, channel center frequency is 107.9 MHz. Each 200 kHz channel has a 150 kHz modulation bandwidth with 25 kHz “guard bands” on either side of it to minimize the effects of overmodulation (overdeviation). The FM broadcast band permits a deviation ratio, DR of 5 and a maximum modulating frequency of 15 kHz.

  34. Exercises • Illustrate: • a) The frequency spectrum of the channel centered on 99.9 MHz, showing all relevant frequencies. • b) The frequency spectrum of the FM band, showing details of the three lowest frequency channels and the three highest-frequency channels.

  35. Exercises • c) Calculate the bandwidth of the FM signal by using the Bessel functions and Carson's rule. • d) Identify which bandwidth calculation best fits the available channel bandwidth?

More Related