1 / 22

Window Details in Solid Masonry/ Veneer Construction (Continued)

Window Details in Solid Masonry/ Veneer Construction (Continued). Window Assembly Review. Finished window assembly depends on: architectural design of structure region of country/climate material of structure type of window Must be familiar with installation sequence

abeni
Download Presentation

Window Details in Solid Masonry/ Veneer Construction (Continued)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Window Details in Solid Masonry/ Veneer Construction (Continued)

  2. Window Assembly Review • Finished window assembly depends on: • architectural design of structure • region of country/climate • material of structure • type of window • Must be familiar with • installation sequence • proper weatherproofing

  3. Window Types - Materials • Same as in wood construction • wood • steel • aluminum • vinyl/wood covered with vinyl (wood clad) • combination

  4. Window Types - Styles in Masonry Construction • Same as in Wood Construction • casement • horizontal sliding • double-hung • awning • louver/jalousie • fixed sash • combination types • bay, bow, box

  5. Combination Units • max light • large viewing area • good ventilation • very common today • 2 casement with center picture window

  6. Detailing Windows in Masonry Construction • Limited flexibility with masonry construction • stay with standard sizes designed for block • Window action is not important • Weatherproofing & installation are important • Brick and Brick Veneer masonry have some flexible • can adjust for different masonry openings

  7. Pictorial - Window in Masonry Construction • Horizontal sliding window - wood frame attached to concrete block

  8. Masonry Construction Window Details • Metal drip at sill • Caulking used to seal head and jamb

  9. Steel Casement in Masonry Construction • Pre-cast concrete sill with drip slot on underneath side • Sash block (see page 105 of text) used for head and jamb • Window fin fits into the slot of the sash block and grout fixes the window in place

  10. Brick Window Exterior • Head and sill materials can be different than jamb material

  11. Brick Construction - Window Elevation and Nomenclature • Coordinate elevation drawing with drawing notations for each detail

  12. Brick Construction - Head Detailof wood casement • Notation 21 • Notice steel angles supporting the brick • Caulking used to weather seal installation • Space and drywall to finish interior

  13. Brick Construction - Jamb Detailof wood casement window • Notation 22 • Caulking use to seal installation • Metal ground at exposed edge of drywall

  14. Brick Construction - Sill Detail • Notation 23 • Notice handle to open and close casement window • Brick sill is sloped to divert water away from window • Again, caulking and metal trim use to seal and finish installation

  15. Vertical Mullion Detail • Notation 24 • Two casement windows side-by-side, joint covered with trim to finish installation

  16. Head Detail (masonry) • Note use of caulking and wood trim • Wood sliding window

  17. Sill Detail (masonry) • Note use of grout and caulking • Wood sliding window

  18. Brick Veneer Construction Details • Notice sloped brick sill • Notice brick shown in section and elevation • Notice inside finish moldings • Brick at head detail supported by angle

  19. Wood Window - Double HungElevation/Head/Jamb/Sill Details

  20. Extra Credit Assignment • Elevate and detail each window type for the Hotel project on Sheet A-8. The End.

  21. Drawing Exercise Window Detail (cont); 3”=1’-0” • Head Detail • Do not place a break line through the header • Header with 1/2” spacer between 2-2x8 headers • 1/2” gypsum board interior wall • 5/8” solid sheathing/remove plaster etc shown • 2 3/4” x 3 1/2” x 3/16” steel angle lintel • double 1/4” glass with 1/2” air space (use proper glass symbol) typical all details

  22. Drawing Exercise Window Detail (cont) 3”=1’-0” • Jamb Detail • show sill lines (brick & wood) in Jamb Detail • finished jamb from 2”x6” • align all details • trimmer note is 2-2x4 studs (no inch marks • Sill Detail • Extend brick sillto overhang 1 1/2” underneath side, show entire brick sill and more below it • Add thin lines for jamb beyond • coordinate and reference all details with elevation

More Related