Servo Stabilizer Manufacture - ABS Power

1. ABS Power ABS Power is an ISO 9001:2008 certified company. We manufacture and export quality products such as Servo Voltage Stabilizers, Isolation Transformers, Sine Wave Inverter, Variable Transformers, Voltage Regulator and Controllers , Solar Inverter and Constant Voltage Transformers. www.abspower.in

2. Servo Stabilizer Manufacture – ABS Power ABS Power is synonymous with power quality and energy management. The people behind ABS have a comprehensive experience of over 35 years in design & development, manufacturing and quality assurance. Superior design and reliable engineering is our core strength and manufacturing excellence help us offer dependable solutions for all types of power quality problems related to voltage, frequency, transients, harmonics, ground leakage currents, power factor etc. Advantages of Servo Stabilizers:- 1. Simple construction and operating principle 2. Lesser distortion in the output waveform 3. Use of analog electronic circuit 4. Suitable for large loads

3. Static Stabilizer (PWM-IGBT) • The static stabilizer offers a reasonable improvement on slow servo controlled stabilizer as well as other static tap changing stabilizers. The control voltage is imposed on the primary of this buck-boost transformer. The voltage regulation with help of buck and boost topology is achieved electronically without the step changes in voltage that occur when the system regulates. This task is accomplished through a feedback and a control system implemented by using a microcontroller.The system uses IGBTs as power switches. Direct AC-AC converter circuit improve the overall system response and fast voltage correction. No storage capacitor increase life of the system.

4. ABS Power LT Panel LT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Such panels are used in industries both for internal and external use and, therefore, they are quite rugged to withstand different climatic conditions. Our LT panels are designed to work with low electricity consumption that makes them cost effective. These panels are used in commercial buildings and industries where there is fluctuation in voltage and power supply. The electrical load required by a unit depends upon the type of machineries, cooling plants and other devices installed. There is always a possibility of damage of these equipments if power fluctuates. In case of fixed loads they can be safeguarded using capacitors, but in case of varied loads, a mechanism to switch in and switch out the capacitors is required which is basically handled using APFC panels.

5. ABS Power Isolation Transformer We are manufacturers & suppliers of high-quality Isolation & Transformers.Isolation & ultra isolation transformer manufactured and supplied by Servokon is used for decoupling two circuits. The transformer can rightly be considered as the up-graded version of regular isolation transformer. It has secondary and primary coils and for shielding purpose an inductance has been created between these coils to give more noise attenuation. This is due to Inductive and SMPS loads, electronic ballasts, PWM switching systems, or even improper earthing. Such electrical noise often damages costly Hi-Tech machinery, unduly interrupt factory operations and increase down time resulting in increased expenses. The lack of adequate protection in such environments results in the steady rise of failure rate in such equipments. Isolated power supply has therefore become a necessity in order to prevent such breakdown time and costs.

6. Get In Touch Address:- 30 Kiran Complex, Khokipur Road, Ambala Cantt, Haryana, India Email:- info@abspower.in Phone:- 90340-16344 Website:- http://www.abspower.in