1 / 21

ATM Dslam Alcatel ASAM7300

ATM Dslam Alcatel ASAM7300. Performing CLI Configuration. Connect ASAM 7300. Use RS-232 console port 1. Start "Hyper-terminal" program 2. Select COM port to communicate with ACU card Choose direct to COM1 or COM2 click OK 3. Set Port Properties -- Port Setting:

adin
Download Presentation

ATM Dslam Alcatel ASAM7300

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ATM Dslam Alcatel ASAM7300 Performing CLI Configuration

  2. Connect ASAM 7300 Use RS-232 console port 1. Start "Hyper-terminal" program 2. Select COM port to communicate with ACU card Choose direct to COM1 or COM2 click OK 3. Set Port Properties -- Port Setting: - Bit per second: 9600 - Data bits: 8 - Stop bits: 1 - Parity bits: None -Flow Control: None -Press “OK”

  3. Press “Space Bar” Enter Username and Password < Would you like to establish a prompt login session? (Y, [N]): YEnter Enter Username : SUPERUSER <- capital letter Enter Password : ANS#150 <- capital letter

  4. Connect ASAM 7300 (Telnet) telnet 10.19.4.xxx < Would you like to establish a prompt login session? (Y, [N]): Y Enter Username : tpk Enter Password : cat123# IP 0 /* A L C A T E L */ /* Telecom */ CM-APPU-AC01 08-09-24 04:34:59 M 0 COMPLD /* act-user */ /* Alcatel ADSL : This is a private computer system. */ /* Unauthorized access or use may lead to prosecution. */ /* 1 User(s) Logged On */ ; /* HELP MENU HELP or ? Type HELP or ? for this menu. MENU Type MENU for menu mode. <UP ARROW> or '^B' Recall previous commands. <DOWN ARROW> or '^N' Recall successive commands. <LEFT ARROW> or '^D' Move cursor left one space. <RIGHT ARROW> or '^F' Move cursor right one space. '^E' Move cursor to end of line. '^A' Move cursor to start of line. <CAN> or '^X' Reset command input processing. <BS> or '^H' Delete previous input character. <DEL> Restart current line input. */ <

  5. System Set up • SET –ip on DSLAM : IP=172.24.7.6, NETMASK =255.255.255.0 ENT-IPPORT::NTENET:::MANUAL:PHYADDR=,IPADDR=192.168.1.2,NETMASK=255. 255.255.0,MTU=1500 Execute ? (Y,N) [Y] : 2. SET system clock : ED-SYNCN::CLKSRCNT::::SRCSELSCH=LOC Execute ? (Y,N) [N] : Y 3. SET SID Name : set-sid:::::Node-test Execute ? (Y,N) [N] : Y

  6. System Set up 4. Add User Login Management ent-secu-user::lpn:::lpn123#,,7,7,7,7:PAGE=999,UAGE=999,TMDIS=y Execute ? (Y,N) [Y] : y IP 0 < CM-APPU-AC01 08-09-24 05:14:04 M 0 COMPLD /* ent-secu-user::lpn:::******,,7,7,7,7:PAGE=999,UAGE=999,TMDIS=y */ ; <

  7. Set up equipment Set up equipment by command by press “Crol+C”. 1. Set up shelf: ENT-EQPT::SHELF-1-1:::UMRAM-B:SWVER=,PORTS=:IS Execute ? (Y,N) [Y] 2. Set-up NT card : ENT-EQPT::NTA:::SANT-F:SWVER=GFDRAA47.067,PORTS=:IS Execute ? (Y,N) [Y] : 3. Set-up LT MultiDSL card on Rack 1,shelf 1,slot 1: ENT-EQPT::LT-1-1-1:::ABLT-D:SWVER=L7D6AA47.065,PORTS=:IS Execute ? (Y,N) [Y] : 4. Set-up LT SHLT-C card on Rack 1,shelf 1,slot 2: ENT-EQPT::LT-1-1-2:::SHLT-C:SWVER=LPR9AA47.060,PORTS=:IS Execute ? (Y,N) [Y] :

  8. Create Profile 1. Network profile for NNI ,4000VPI & 10368 VCI: profile index 2 ENT-PROFILE-ATMACC::2:::NT_atmacc:GFCMODE=NNI,MAXVPCS=4000,MAXVCCS= 10368,VPIBITS=12,VCIBITS=16,POLICING=NONE,SVCMAXVPI=0,SVCMINVCI=48 Execute ? (Y,N) [Y] : Y 2. Line card profile for UNI ,16 VPI & 16 VCI: profile index 3 ENT-PROFILE-ATMACC::3:::LT_atmacc:GFCMODE=UNI,MAXVPCS=16,MAXVCCS=16, VPIBITS=4,VCIBITS=6,POLICING=ALL,SVCMAXVPI=0,SVCMINVCI=48 Execute ? (Y,N) [Y] : Y 3. Network profile for CAC ,CBR 2000,UBR 2000, RTVBR 1000, NRTVBR 1000: profile index 2 ENT-PROFILE-CAC::2:::NT_cac:CBRMAXCON=2000,CBRBWSECFAC=100,CBRBUFSECFAC=100, UBRMAXCON=2000,UBRMCRSECFAC=25,RTVBRMAXCON=1000,RTVBRBWSECFAC=100,RTVB RBUFSECFAC=100,RTVBRNGCRSECFAC=100,RTVBROVRBKFAC=0,NRTVBRMAXCON=1000,NR TVBRBWSECFAC=100,NRTVBRBUFSECFAC=,NRTVBRNGCRSECFAC=0,NRTVBROVRBKFAC=0, GFRMAXCON=,GFRBWSECFAC=25,GFRBUFSECFAC=,GFROVRBKFAC=0,AGRBWSECFAC=100, AGRGCRSECFAC= Execute ? (Y,N) [Y] : 4. Line card profile UBR 16 : profile index 3 ENT-PROFILE-CAC::3:::LT_CAC:CBRMAXCON=,CBRBWSECFAC=100,CBRBUFSECFAC=, UBRMAXCON=16,UBRMCRSECFAC=25,RTVBRMAXCON=,RTVBRBWSECFAC=100,RTVBRBUFS ECFAC=,RTVBRNGCRSECFAC=100,RTVBROVRBKFAC=0,NRTVBRMAXCON=,NRTVBRBWSECF AC=100,NRTVBRBUFSECFAC=,NRTVBRNGCRSECFAC=0,NRTVBROVRBKFAC=0,GFRMAXCON= ,GFRBWSECFAC=25,GFRBUFSECFAC=,GFROVRBKFAC=0,AGRBWSECFAC=100,AGRGCRSECF AC= Execute ? (Y,N) [Y] :

  9. Create Profile 5. Create profile for line rate on XDSL line card : profile index 2 ENT-PROFILE-XSRVC::2:::XDSL_LINE_ALL:RAMODEDN=AT_INIT,RAMODEUP= AT_INIT Execute ? (Y,N) [Y] : Y 6. Set-up line rate min up-dn 64k, plan dn 4Mb/s, plan up 1Mb/s,: profile index 2 ED-PROFILE-BEARER::2::::MINBRDN=64,MINBRUP=64,PBRDN=4096,PBRUP=1024, MAXBRDN=4096,MAXBRUP=1024,MAXDELDN=1,MAXDELUP=1,MININPDN=,MININUP= Execute ? (Y,N) [Y] : 7. Active profile : profile index 2 ACT-PROFILE-XSRVC::2:: Execute ? (Y,N) [Y] : Y

  10. Apply profile 1. Apply profile on network card : CAC index 2 up&down , ATM index 2 ed-oc3::ntoc3::::OPMODE=,CACPROFUP=2,CACPROFUPNM=,CACPROFDN=2, CACPROFDNNM=,ATMACCPROF=2,ATMACCPROFNM=; Execute ? (Y,N) [Y] : Y 2. Apple profile ATM on XDSL line card : CAC index 3, ATM ACC index 3 : ED-ATMPORT::LTATM-1-1-1-1::::IFTYPE=LTUSR,CACPROFDN=3,CACPROFDNNM=, CACPROFUP=3,CACPROFUPNM=,ATMACCPROF=3,ATMACCPROFNM=,CDVTPROF=,CDVTPROFNM=,NGCRWEIGHT=:IS Execute ? (Y,N) [Y] : Y

  11. Set up traffic description (QOS) 1. index 2: maximum rate 1 Mb/s(peak cell rate 2415 cell/s)UBR: ENT-PROFILE-TRAFDSC::2:::UP_UBR1M,,UBR:FRAMEDSC=,CLP1PCR=2415,CDVT=, CLP1MCR=,CLP1SCR=,MBS=,CLP0SCR=,MFS= Execute ? (Y,N) [Y] : 2. index 3: maximum rate 4 Mb/s(peak cell rate 9660 cell/s)UBR: ENT-PROFILE-TRAFDSC::3:::DOWN_4M_UBR,,UBR:FRAMEDSC=,CLP1PCR=9660, CDVT=,CLP1MCR=,CLP1SCR=,MBS=,CLP0SCR=,MFS= Execute ? (Y,N) [Y] :

  12. Set-up XDSL line 1. Set-up XDSL line to MULTI_ standard : with profile index 2 : ENT-PROFILE-XLNE::2:::MULTI-STD-ALL-MODES Execute ? (Y,N) [Y] : Y 2. Modify line type : index 2: MOD-PROFILE-XLNE::2:: Execute ? (Y,N) [Y] : Y 3. Edit type : index 2 : ED-PROFILE-XLNECOM::2::::OPMODEA=H'105,OPMODEA2=H'010C0004, MODPROP=,MAXATPDN=255,MAXATPUP=255,PBOMODE=OFF,MAXARPUP=255,MINNMRDN=0,MINNMRUP=0,TNMRDN=60,TNMRUP=60,MAXNMRDN=511,MAXNMRUP=511 ,OPMODEV=,OPMODEA2M= Execute ? (Y,N) [Y] : 4. Complete line type : index 2: COMP-PROFILE-XLNE::2:: Execute ? (Y,N) [Y] : Y

  13. Set-up XDSL line 5. Apply line rate& line type on XDSL port : ED-XDSL::XDSL-1-1-1-1::::PORTID=TEST,XSRVCPROFID=2, XSRVCPROFNM=,XLNEPROFID=2,XLNEPROFNM=,OPMASKA=, OPMASKA2=,OPMASKV=,OPMASKA2M=,BONDMODTYPE=:IS Execute ? (Y,N) [Y] :

  14. Set-up line SHDSL Set-up line SHDSL : use CAC index 3, ATM ACC index 3 , min rate 1024 ,max 2048 ,2 wires, type A. ENT-SHDSL::LTSHDSL-1-1-2-1:::0:PORTID=CAT,CACPROFDN=3,CACPROFDNNM=, CACPROFUP=3,CACPROFUPNM=,ATMACCPROF=3,ATMACCPROFNM=, MINLINERATE=1024,MAXLINERATE=2048,TARRMDNWC=5,TARRMDNCC=5, TARRMUPWC=5,TARRMUPCC=5,PSDTYPE=SYMMETRIC,WIREMODE=2WIRE, REMOTEMGT=DISABLED,REGIONCONF=B,IMAGRP=NULL,SEALCURRENT =HWDEPENDENT:IS Execute ? (Y,N) [Y] : Y Delete port SHDSL • *** delete cross connection & virtual connection link **** dlt-shdsl::ltshdsl-1-1-2-2:: Execute ? (Y,N) [N] :

  15. Create Virtual connection link (VCL): 1. Line card : rack-1,shelf-1,slot-2,port-1, vpi 0,vci 35,QOS index 2(ref to item 6 bit rate 1Mb/s)up , down : ENT-VCL::LTVCL-1-1-2-1-0-35:::2,2,,:LINKTYPE=P2P,SEGENDPT=NO Execute ? (Y,N) [Y] : 2. Network port : VPI-VCI, QOS up, down (ref to item 6 bit rate 1Mb/s ) ENT-VCL::NTVCL-97-60:::2,2,,:LINKTYPE=P2P,SEGENDPT=NO Execute ? (Y,N) [Y] : Y Create Cross connection link (CRS): Create Cross connection NT(VPI-VCI) and LT (rack-1,shelf-1,slot-2,port-1, vpi 0,vci 35) : ENT-CRS-VC::NTVCL-97-60,LTVCL-1-1-2-1-0-35:::::IS Execute ? (Y,N) [Y] :

  16. Show status port rtrv-xdsl::xdsl-1-1-1-5:::::, Execute ? (Y,N) [Y] : IP 0 < CM-APPU-AC01 08-09-24 07:16:16 ==== port up ==== M 0 COMPLD /* rtrv-xdsl::xdsl-1-1-1-5:::::, */ "XDSL-1-1-1-5::PORTID=\"Test 4/1 Mbps\",XSRVCPROFID=24, XSRVCPROFNM=\"Dn4M_Up1M\",XLNEPROFID=4,XLNEPROFNM=\"POTS_ALL\", OPMASKA=H'0000,OPMASKA2=H'00000000,OPMASKV=H'0000,OPMASKA2M=H'0000, LCMODEA=H'0105,LCMODEA2=H'014C0004,LCMODEV=H'0000,LCMODEA2M=H'0004, BONDMODTYPE=NATIVE:IS-NR," ; CM-APPU-AC01 08-09-24 07:18:25 ==== port down ===== M 0 COMPLD /* rtrv-xdsl::xdsl-1-1-1-6:::::, */ "XDSL-1-1-1-6::PORTID=\"Test 4/1 Mbps\",XSRVCPROFID=24, XSRVCPROFNM=\"Dn4M_Up1M\",XLNEPROFID=4,XLNEPROFNM=\"POTS_ALL\", OPMASKA=H'0000,OPMASKA2=H'00000000,OPMASKV=H'0000,OPMASKA2M=H'0000, LCMODEA=H'0105,LCMODEA2=H'014C0004,LCMODEV=H'0000,LCMODEA2M=H'0004, BONDMODTYPE=NATIVE:OOS-AU,“ CM-APPU-AC01 08-09-24 07:18:08 ==== port Unactive ===== M 0 COMPLD /* rtrv-xdsl::xdsl-1-1-1-1:::::, */ "XDSL-1-1-1-1::PORTID=available,XSRVCPROFID=0,XLNEPROFID=0,OPMASKA=H'0000, OPMASKA2=H'00000000,OPMASKV=H'0000,OPMASKA2M=H'0000,LCMODEA=H'0105, LCMODEA2=H'014C0004,LCMODEV=H'0000,LCMODEA2M=H'0004,BONDMODTYPE=NATIVE: OOS-AUMA," ;

  17. Show status port rept-opstat-xlne::xdsl-1-1-1-4:: Execute ? (Y,N) [Y] : IP 0 < CM-APPU-AC01 08-09-24 07:33:09 M 0 COMPLD /* rept-opstat-xlne::xdsl-1-1-1-4:: */ "XDSL-1-1-1-4:RELCAPUP,89" "XDSL-1-1-1-4:NMRUP,103" "XDSL-1-1-1-4:PWRDN,-65" "XDSL-1-1-1-4:ATENUP,7" "XDSL-1-1-1-4:LPATENUP,27" "XDSL-1-1-1-4:PSDDN,-689" "XDSL-1-1-1-4:RELCAPDN,23" "XDSL-1-1-1-4:NMRDN,317" "XDSL-1-1-1-4:PWRUP,120" "XDSL-1-1-1-4:ATENDN,0" "XDSL-1-1-1-4:LPATENDN,0" "XDSL-1-1-1-4:PSDUP,-383" ; < rept-opstat-xbearer::xdsl-1-1-1-5:: Execute ? (Y,N) [Y] : IP 0 < CM-APPU-AC01 08-09-24 07:56:32 M 0 COMPLD /* rept-opstat-xbearer::xdsl-1-1-1-5:: */ "XDSL-1-1-1-5:CURBRUP,1021" "XDSL-1-1-1-5:CURDELUP,14" "XDSL-1-1-1-5:IMNPROTUP,18" "XDSL-1-1-1-5:MAXATTBRUP,1210" "XDSL-1-1-1-5:CURBRDN,4093" "XDSL-1-1-1-5:CURDELDN,15" "XDSL-1-1-1-5:IMNPROTDN,104" "XDSL-1-1-1-5:MAXATTBRDN,17564" ; <

  18. Show status VCL rtrv-vcl::all:::::, Execute ? (Y,N) [Y] : IP 0 < CM-APPU-AC01 08-09-24 07:24:39 M 0 COMPLD /* rtrv-vcl::all:::::, */ "NTVCL-97-37:10,7,\"ubr_4m\",\"ubr_1m\":LINKTYPE=P2P,SEGENDPT=NO:IS-NR," "NTVCL-97-38:10,7,\"ubr_4m\",\"ubr_1m\":LINKTYPE=P2P,SEGENDPT=NO:IS-NR," "NTVCL-97-39:10,7,\"ubr_4m\",\"ubr_1m\":LINKTYPE=P2P,SEGENDPT=NO:IS-NR," "NTVCL-97-45:6,7,\"ubr_6m\",\"ubr_1m\":LINKTYPE=P2P,SEGENDPT=NO:IS-NR," "NTVCL-97-60:4,4,\"ubr_2m\",\"ubr_2m\":LINKTYPE=P2P,SEGENDPT=NO:IS-NR," "NTVCL-98-48:4,1,\"ubr_2m\",\"ubr_800k\":LINKTYPE=P2P,SEGENDPT=NO:IS-NR,“ "LTVCL-1-1-1-2-0-35:7,10,\"ubr_1m\",\"ubr_4m\":LINKTYPE=P2P,SEGENDPT=NO: IS-NR," "LTVCL-1-1-1-3-0-35:7,10,\"ubr_1m\",\"ubr_4m\":LINKTYPE=P2P,SEGENDPT=NO: IS-NR," "LTVCL-1-1-1-6-0-35:7,10,\"ubr_1m\",\"ubr_4m\":LINKTYPE=P2P,SEGENDPT=NO: OOS-AU," "LTVCL-1-1-1-7-0-35:7,10,\"ubr_1m\",\"ubr_4m\":LINKTYPE=P2P,SEGENDPT=NO: IS-NR," "LTVCL-1-1-1-8-0-35:7,10,\"ubr_1m\",\"ubr_4m\":LINKTYPE=P2P,SEGENDPT=NO: IS-NR," "LTVCL-1-1-1-10-0-35:7,6,\"ubr_1m\",\"ubr_6m\":LINKTYPE=P2P,SEGENDPT=NO: OOS-AU," "LTVCL-1-1-2-1-0-35:4,4,\"ubr_2m\",\"ubr_2m\":LINKTYPE=P2P,SEGENDPT=NO: IS-NR," ; <

  19. Show cross connection rtrv-crs-vc::all::::: Execute ? (Y,N) [Y] : IP 0 < CM-APPU-AC01 08-09-24 07:30:25 M 0 COMPLD /* rtrv-crs-vc::all::::: */ "NTVCL-97-60,LTVCL-1-1-2-1-0-35:::IS-NR" "NTVCL-97-45,LTVCL-1-1-1-10-0-35:::OOS-AU" "NTVCL-97-42,LTVCL-1-1-1-7-0-35:::IS-NR" "NTVCL-97-37,LTVCL-1-1-1-2-0-35:::IS-NR" "NTVCL-97-38,LTVCL-1-1-1-3-0-35:::IS-NR" "NTVCL-97-43,LTVCL-1-1-1-8-0-35:::IS-NR" "NTVCL-97-39,LTVCL-1-1-1-4-0-35:::IS-NR" "NTVCL-97-40,LTVCL-1-1-1-5-0-35:::IS-NR" "NTVCL-97-41,LTVCL-1-1-1-6-0-35:::OOS-AU" ; <

  20. Reset port =============== reset port ADSL ============== Set port  status = outoffservice (oos) ed-xdsl::xdsl-1-1-1-1::::PORTID=,XSRVCPROFID=,XSRVCPROFNM=,XLNEPROFID=,XLNEPROFN M=,OPMASKA=,OPMASKA2=,OPMASKV=,OPMASKA2M=,BONDMODTYPE=:oos Execute ? (Y,N) [Y] : • Set port  status = inservice (IS) ed-xdsl::xdsl-1-1-1-1::::PORTID=,XSRVCPROFID=,XSRVCPROFNM=,XLNEPROFID=,XLNEPROFN M=,OPMASKA=,OPMASKA2=,OPMASKV=,OPMASKA2M=,BONDMODTYPE=:is Execute ? (Y,N) [Y] : • =============== reset port SHDSL ============== • Set port  status = outoffservice (oos) • ed-shdsl::ltshdsl-1-1-2-1::::PORTID=,CACPROFDN=,CACPROFDNNM=,CACPROFUP=,CACPROFU • PNM=,ATMACCPROF=,ATMACCPROFNM=,MINLINERATE=,MAXLINERATE=,TARRMDNWC=,TARRMDNCC=,T • ARRMUPWC=,TARRMUPCC=,PSDTYPE=,REMOTEMGT=,REGIONCONF=,SEALCURRENT=:oos • Execute ? (Y,N) [Y] : • Set port  status = inservice (IS) • ed-shdsl::ltshdsl-1-1-2-1::::PORTID=,CACPROFDN=,CACPROFDNNM=,CACPROFUP=,CACPROFU • PNM=,ATMACCPROF=,ATMACCPROFNM=,MINLINERATE=,MAXLINERATE=,TARRMDNWC=,TARRMDNCC=,T • ARRMUPWC=,TARRMUPCC=,PSDTYPE=,REMOTEMGT=,REGIONCONF=,SEALCURRENT=:is • Execute ? (Y,N) [Y] :

  21. Delete Cross Connection • Step to Delete Channel NT side and LT side • 1. Delete Cross connection NT(VPI 97-VCI 40) and LT (rack-1,shelf-1,slot-1,port-5, vpi 0,vci 35) : • DLT-CRS-VC::NTVCL-97-40,LTVCL-1-1-1-5-0-35:::::IS • Execute? (Y,N) [Y] : Y • 2 .Delete Channel LT Circuit 5 (rack-1,shelf-1,slot-1,port-5, vpi 0,vci 35) : • dlt-vcl::ltvcl-1-1-1-5-0-35:: • Execute? (Y,N) [Y] : Y • 3. Delete Network port NT side (vpi 97,vci 40) : • dlt-vcl::ntvcl-97-40:: • Execute? (Y,N) [Y] : Y

More Related