1 / 10

OR-PR 156

OR-PR 156. Fabricate a Standard Full Calf Cuff. Fabricate a Standard Full Calf Cuff. Cut a strip of leather 2 1/2” wide and the length of the largest calf circumference + 2 1/2”. 2 1/2”. Largest Calf Circumference + 2 1/2”. Fabricate a Standard Full Calf Cuff.

adsila
Download Presentation

OR-PR 156

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. OR-PR 156 Fabricate a Standard Full Calf Cuff

  2. Fabricate a Standard Full Calf Cuff • Cut a strip of leather 2 1/2” wide and the length of the largest calf circumference + 2 1/2” 2 1/2” Largest Calf Circumference + 2 1/2”

  3. Fabricate a Standard Full Calf Cuff • Cut out pearl/cream cow strip as long as cuff and about 2” wider • Make sure that stretch runs along length Cuff length STRETCH Cuff width + 2”

  4. Fabricate a Standard Full Calf Cuff • Glue back of cuff as well as cowhide

  5. Fabricate a Standard Full Calf Cuff • Stretch cowhide lengthwise

  6. Fabricate a Standard Full Calf Cuff • Turn leather strip over, center, and adhere to cowhide strip

  7. Fabricate a Standard Full Calf Cuff • Measure in 2 1/2 “ from each end and mark top & bottom edges of cuff • Cut cowhide at 45° angles as shown • Glue edges of leather strip within cut lines 2 ½” 2 ½”

  8. Fabricate a Standard Full Calf Cuff • Fold and glue down cowhide over edges of cuff • Sew around perimeter of cuff, 3/16” from edges

  9. Fabricate a Standard Full Calf Cuff • Trim away cowhide around perimeter of cuff • Trim folded-over cowhide 1/8” from stitching • Miter corners of cuff slightly

  10. Fabricate a Standard Full Calf Cuff • Your cuff is now ready to attach to the calf band

More Related