1 / 15

Why do we need data like this?

Travel time data for modelers - the Do’s, Don’ts, and Maybes: Sam Granato, Ohio DOT. Why do we need data like this?. Because our customers don’t care about volume to “capacity” ratios, instead they want to know:. In the beginning – floating car surveys and spot speed sensors.

aelan
Download Presentation

Why do we need data like this?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Travel time data for modelers - the Do’s, Don’ts, and Maybes:Sam Granato, Ohio DOT

  2. Why do we need data like this? • Because our customers don’t care about volume to “capacity” ratios, instead they want to know:

  3. In the beginning – floating car surveys and spot speed sensors • CMS / CMAQ project effectiveness • Used for MPO travel model validation since 1990’s to better model congestion & Level of Service • Statewide, developed for “speed table” by type of road – both average and running speeds (to start up some “junction-based” model networks in Ohio)

  4. Then, the same but more (and more things to use them for) • “high sample size” floating car (arterials in Parkersburg/Marietta and freeways in Cleveland) • Can use to measure variability in travel time as well as more confident average, and how the variability changes as function of distance/# segments (i.e. from link-level to travel-path level

  5. New Sources of Speed Data • “Archive” data from vehicle fleets & cell probes • Extensive road network coverage, could replace or reduce/redeploy need for “floating car” surveys

  6. How we ended up with GPS vendor data:

  7. GPS Data availability : • About 33,000 directional miles of TMC roadway statewide (including five miles into adjacent states)

  8. Quality checks for any “biases”: First, compare to ATR sites (mostly rural freeways): • Differences exists in how these are measured (spot vs space mean speeds) • Statewide, average speeds higher on the ATR’s (about 7%) • Check for vehicle class based on WIM station locations on I-70 (Licking county) and I-77 (Noble county).

  9. Quality checks for any “biases”: Second, compare to statewide floating car surveys • Differences exist in route segmentation • Very small sample sizes in the floating car surveys • Overall, in close agreement statewide on average speeds including by time of day

  10. GPS data (vs floating car)– uses & limitations • Far higher sample sizes, more versatility on hour of day / day of week / season of year • Good for overall speed validation of model on average values, not necessarily for variability/reliability • Depending on level of access, might not have ability to see the impact of distance on reliability / journey time • “Buffer index” measures found to measure system-level, not user-level reliability

  11. Local sample speed data provided us both (expected) sample sizes by corridor/HOD AND percentile values

  12. Sample finding #1: V/C ratio does not predict congestion (and LOS) very well

  13. Sample finding #1-A: Speed does not vary that much by time of day • Volume offset by driver and vehicle characteristics • Signal timing, parking management

  14. Sample finding #2: Curves and Railroad crossings don’t seem to slow us down that much

  15. Questions? • Sam.granato@dot.state.oh.us • 614-644-6796

More Related