1 / 11

Rapid Prototyping

Rapid Prototyping. ISE 240. Processing of RP Parts.

affrica
Download Presentation

Rapid Prototyping

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rapid Prototyping ISE 240

  2. Processing of RP Parts FIGURE 10.46 The computational steps involved in producing a stereolithography file. (a) Three-dimensional description of the part. (b) The part is divided into slices. (Only 1 in 10 is shown.) (c) Support material is planned. (d) A set of tool directions is determined for manufacturing each slice. Shown is the extruder path at section A-A from (c), for a fused-deposition modeling operation.

  3. Rapid Prototyping Processes TABLE 10.7 Characteristics of rapid-prototyping processes.

  4. RP Materials TABLE 10.8 Mechanical properties of selected materials for rapid prototyping.

  5. Stereolithography and FDM FIGURE 10.47 Schematic illustration of the stereolithography process. Source: Courtesy of 3D Systems. FIGURE 10.48 (a) Schematic illustration of the fused-deposition modeling process. (b) The FDM Vantage X rapid prototyping machine. Source: Courtesy of Stratasys, Inc.

  6. Support Structures FIGURE 10.49 (a) A part with a protruding section that requires support material. (b) Common support structures used in rapid-prototyping machines. Source: After P.F. Jacobs.

  7. Selective Laser Sintering FIGURE 10.50 Schematic illustration of the selective-laser-sintering process. Source: After C. Deckard and P.F. McClure.

  8. Three-Dimensional Printing FIGURE 10.51 Schematic illustration of the three-dimensional-printing process. Source: After E. Sachs and M. Cima. FIGURE 10.52 (a) Examples of parts produced through three-dimensional printing. Full color parts also are possible, and the colors can be blended throughout the volume. Source: Courtesy ZCorp, Inc.

  9. 3D Printing of Metal Parts FIGURE 10.53 The three-dimensional printing process: (a) part build; (b) sintering, and (c) infiltration steps to produce metal parts. Source: Courtesy of the ProMetal Division of Ex One Corporation.

  10. Sprayed Metal Tooling Process FIGURE 10.55 Production of tooling for injection molding by the sprayed-metal tooling process. (a) A pattern and base plate are prepared through a rapid-prototyping operation; (b) a zinc-aluminum alloy is sprayed onto the pattern (See Section 4.5.1); (c) the coated base plate and pattern assembly is placed in a flask and back-filled with aluminum-impregnated epoxy; (d) after curing, the base plate is removed from the finished mold; and (e) a second mold half suitable for injection molding is prepared.

  11. Example: RP Injection Manifold FIGURE 10.56 Rapid prototyped model of an injection-manifold design, produced through stereolithography. Source: 3D Systems.

More Related