Superior Greige/Grey Fabric Offerings from Agal Textiles: Unmatched Quality and

1. Agal Textiles THE 4-POINT FABRIC INSPECTION SYSTEM Ensuring Quality in Textile Manufacturing PRESENTED BY Subhashini M

2. Agal Textiles Agenda 1 4 Prepare for inspection Evaluation It can’t be accepted as below situation 2 Inspection procedures 5 3 Score method 6 Bulk acceptable standard

3. Back to Agenda Agal Textiles Prepare for inspection • Supplier should provide the packing list and 100% internal inspection report. • Selects rolls according of 10% of the order quantity at random • At least 1 roll should be selected in each shade and each lot.

4. Back to Agenda Inspection procedures Agal Textiles • Fabric passing through the Inspection machine must be between 45-60 degree angles to inspector. • Need to have appropriate D65 lights and counter and Backlight. • Fabric speed on inspection machine must not be more than 15 meters per minute • Assess the color, construction, finish and visual appearance with approved standard prior to start the inspection. • Shade continuity in a roll by checking shade variation between center and selvage and the beginning ,middle and end of each roll must be evaluated and documented.

5. Back to Agenda Inspection procedures Agal Textiles • fabric must be weighed against standard approved weight to verify the quantiry • All 4-point defects must be flagged at one side selvage. • The length of each roll inspected must be compared with ticketed tag . Any deviation must be documented and reported to supplier. • If printed or yarn dyed fabrics are being inspected the repeat measurement must be done from beginning /middle/end of inspected rolls.

6. Back to Agenda Agal Textiles Score method The score is conducted based on 4-point system in bulk. Size of Defect Penalty 3 inches or less 1 point 0ver 3 but not over 6 inches 2 point 0ver 6 but not over 9 inches 3 point Over 9 inches 4 point

7. Back to Agenda Agal Textiles Evaluation • A grade ( acceptable): Not over 24 points per 100 sq.yards for single roll • B grade ( degrade): Over 24 points per 100 sq.yards for single roll. • The whole bulk : It can’t be over 20 points per 100 sq. yards

8. Back to Agenda It can’t be accepted as below situation Agal Textiles • Any continuous 4 points defects over 3 meters can’t be accept. • It can't accept having defects in full width within 3 meters of beginning and ending. • It can’t over 1 joint in 1 single roll . • It can’t over 1 joint in 1 single roll . • The length of single roll over 2% shortage compared with ticket ,the whole length of inspected over 1% shortage . • The skew over 3% of the fabric width. The skew of y/d or printing fabric which need position and cutting over 2% of the fabric width.

9. Agal Textiles Back to Agenda Bulk acceptable standard • The fabric mill’s 100% inspection report must pass. • If 10% inspection passes, fabric can be released to the garment supplier. • If 10% inspection fails , the fabric team will inspect an additional 10%, Fabrics will be released after fabric passes the additional inspection. • If the 20% inspected fabric is rejected, mill has to reproduce the entire shipment with the authorization and supervision from the WD corporate and RHQ fabric team. Once completed, the 4 points system repeated. • If the fabric inspection (10%) fails again after the fabric has been replaced, the fabric is rejected. • 10% random inspection report from garment should pass.

10. Agal Textiles For inquiries, contact us. Agal textiles 165/6, S.F.No.792/3B, T.K Sellappan Complex, M.C.Road, Raja street, Perundurai - 638 052, Erode Dist. Tamilnadu. India agaltextiles.in EMAIL agaltextiles@gmail.com CALL US +91 95666 50070 SOCIAL MEDIA @agaltextiles

11. Agal Textiles