1 / 17

C. Andrew Rosenholm , President / Owner Rockwell Oil and Gas Tool Sales car@rockwelloil

Energy Rubber Group, Inc. 2014 Winter Technical Meeting. C. Andrew Rosenholm , President / Owner Rockwell Oil and Gas Tool Sales car@rockwelloil.com. WATER-DISSOLVABLE POLYMERS FOR USE IN MANUFACTURING FRAC BALLS, SEATS AND PLUGS. Examples of degradable polymers in use today: Sutures

ahmed-odom
Download Presentation

C. Andrew Rosenholm , President / Owner Rockwell Oil and Gas Tool Sales car@rockwelloil

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Energy Rubber Group, Inc. 2014 Winter Technical Meeting C. Andrew Rosenholm, President / OwnerRockwell Oil and Gas Tool Sales car@rockwelloil.com WATER-DISSOLVABLE POLYMERS FOR USE IN MANUFACTURING FRAC BALLS, SEATS AND PLUGS

  2. Examples of degradable polymers in use today: Sutures Tacks Bone anchors Golf tees Flatware Bags Foam packaging

  3. Why use water-dissolvable polymers downhole? Main reason: To avoid costly mill-outs Remnants of tools (balls, plugs, seats) will dissolve over time, increasing product flow and production

  4. Q: Why aren’t degradable plastics more prevalent downhole? A: Most degradable plastics lack the tensile strength necessary to hold up to the high pressures used in fracking < 15,000 PSI

  5. DOWNHOLE TOOLS ARE SUBJECTED TO EXTREME PRESSURES! Fig. 1: Frac ball on seat as used in sliding-sleeve fracking, note the 1/16” per side shelf spacing

  6. APPLICATIONS FOR DISSOLVABLE DOWNHOLE TOOLS Fig. 2: Sliding-sleeve frac illustration showing balls and seats Fig. 3: Composite plug used in plug-and-perffrac completions

  7. PRACTICAL DEGRADABLE POLYMERS: • PETROLEUM-BASED: • Oxo-degradable polymers: These additives (pro-oxidants) use a salt • of a transition metal such as cobalt (Co), iron (Fe), manganese (Mn) • or nickel (Ni) to drive the oxidation process which, under the action of heat • or light, will reduce the molecular weight of the polymer to a level • where bacteria & fungi in the soil or disposal environment can further • reduce the material into water, carbon dioxide & biomass. • Traditional base resins: PE, PP, PS, PET • Polymers with hydrolysable backbones (aliphatic polyesters): • Polylactide (PLA) (Crystallinity 12.29% to 47.54%) • PLLA (Crystallinity 37%) • Polyglycolide (PGA) (Crystallinity 45-55%) • NATURAL/AGRO-POLYMERS • Polymers produced from plants: • Polysaccharides: Starch and cellulose • Lipids • Polymers produced from animal sources: • Collagen, chitin

  8. Crystallinity effects degradation During the first phase of degradation, water penetrates the biodegradable device, initially cutting the chemical bonds and converting the long polymer chains into shorter and shorter fragments (hydrolysis).

  9. Ø 3.750” PGA ball failure mode at 7,900 psi Notice how the ball fractured instead of extruding through the seat, this failure mode is a hallmark of crystallinity

  10. OBSERVATIONS ON THE DEGRADABILITY OF PGA Fresh Water When the fracball was kept in water for one month at room temperature little degradation occurred. Raising the temperature of the water to 200° F initiated the dissolving process. At the elevated temperature pieces of the fracball started to flake off, making a popping sound. Brine Water No major changes were observed at any temperature the first 39 h. At increased temperatures (200° F), the ball appeared to dissolve slowly, flaking. Within the next 14 h the diameter was reduced significantly, The Ø1.70’’ ball was reduced to Ø1.39’’. 10 % KCl No major changes were observed over the first 30 hrs. Even at 200° F the ball shrunk only a minimal amount from Ø2.13’’ to Ø2.11’’. After 30 hrsthe ball started giving off flakes with loud popping noises. 10 % HCl No changes were observed at room temperature within the first week.

  11. PGA THICKNESS DECREASE

  12. ALTERNATIVES TO DEGRADABLE POLYMER • Reactive metals:Magnesium, Aluminum, Calcium • Brand names: InTallic™, ExSolv™ Metall • PROS: • High pressure capabilities • Rapid degradation • CONS: • Very expensive • Limited supply

  13. REACTIVITY OF METALS

  14. Ø 3.500” REACTIVE METAL BALL PRESSURE TEST RESULTS

  15. OBSERVATIONS ON THE DEGRADABILITY OF REACTIVE METALS Brine Water At room temperature it took the fracball 9 days to dissolve completely. Increasing the temperature to 200° F resulted in the frac ball dissolving within 22 hrs. Figure 2 – ExSolv™ MetallAcid/brine-dissolvable metal alloy frac ball dissolving Figure 3 – ExSolv™ MetallAcid/brine-dissolvable metal alloy Size comparison after 5 days in brine water at room temperature

  16. CONCLUSIONS: • DEGRADABLE POLYMER DOWNHOLE TOOLS OFFER A COST-EFFECTIVE • WAYTO PREVENT COSTLY MILL-OUTS • IN APPLICATIONS WHERE DEGRADABLE POLYMERS ARE NOT STRONG ENOUGH, • DEGRADABLE METALS CAN SUBSTITUTE, I.E.: USE DEGRADABLE POLYMER FRAC BALLS • UP TO Ø 2.500” THEN SUBSTITUTE REACTIVE METAL BALLS FOR LARGER SIZES • DEGRADABLE POLYMERS NEED ONLY H2O TO BREAK DOWN – HCl CAN ACT AS • AN ACCELERANT • DEGRADABLE METALS NEED SALTS AND/OR ACID TO BREAK DOWN

More Related