1 / 17

Polymer Parameters

Polymer Parameters. Chemical structure Chemical composition and distribution Sequence length and distribution Molecular weight and distribution Chain isomerism Morphology Topology Additives Cost. Amorphous Morphology. Glass Transition Temperature. - 80 °C - 20 °C 105 °C 290 °C.

ailis
Download Presentation

Polymer Parameters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Polymer Parameters • Chemical structure • Chemical composition and distribution • Sequence length and distribution • Molecular weight and distribution • Chain isomerism • Morphology • Topology • Additives • Cost

  2. Amorphous Morphology Glass Transition Temperature • - 80 °C • - 20 °C • 105 °C • 290 °C

  3. Structure-Property Relationships Boiling Point Formula Weight • 46 g/mol • 46 g/mol Boiling Point Formula Weight • 86 g/mol • 188 g/mol

  4. Structure-Property Relationships Tm (°C) ΔG = ΔH — T ΔS

  5. PE vs PTFE

  6. Structure-Property Relationships Tg (°C) Tm (°C) Tm (°C)

  7. Polymer Parameters • Chemical structure • Chemical composition and distribution • Sequence length and distribution • Molecular weight and distribution • Chain isomerism • Morphology • Topology • Additives • Cost

  8. Topology • Soluble and melt processable • Linear • Branched • Long chain • Short chain

  9. Topology

  10. Topology • Network • Insoluble • Intractable • No flow with heat and pressure • aka • Gel, cured, vulcanizate, thermoset, crosslinked • Examples • Rubber, epoxy glue, etc

  11. Mechanical Properties

  12. Effect of Branching on Melting Transitions of PEs

  13. Polymer Parameters • Chemical structure • Chemical composition and distribution • Sequence length and distribution • Molecular weight and distribution • Chain isomerism • Topology • Morphology • Additives • Cost

  14. Additives • Plasticizers • PVC • Tg ≈ 80 °C • Tg ≈ ? °C w/ 2% DOP • Stabilizers • Processing temperature • Operating temperature • Properties • MW • Brittleness • Discoloration • Cross-linking

  15. Additives • Anti-oxidants • Flame retardants • Colorants • Dyes • Fillers • Carbon black: UV screen, enhance modulus • Fibrous reinforcers: glass, carbon, polymeric, ceramics • Economic performance fillers: Saw dust, dirt, etc! • Blowing agents • Lubricants

  16. Polymer Parameters • Chemical structure • Chemical composition and distribution • Sequence length and distribution • Molecular weight and distribution • Chain isomerism • Topology • Morphology • Additives • Cost

  17. Cost • Application dependent • Feedstock dependence • Raw materials cost • Recycle vs new • GDP independence? • Process improvements • COO • Environmental issues • Catalysts • Automation/sensors

More Related