1 / 12

Consumer Product

Consumer Product. Inspection with PMI direct import . May, 2011. Consumer Product . Customer References. Consumer Product . Inspection with PMI direct import. Consumer Product . Set the inspection information using FTA . Consumer Product .

aine
Download Presentation

Consumer Product

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Consumer Product Inspection with PMI direct import May, 2011

  2. Consumer Product • Customer References

  3. Consumer Product • Inspection with PMI direct import

  4. Consumer Product Set the inspection information using FTA

  5. Consumer Product Import the CATIA file included the inspection information

  6. Consumer Product Ref.geometry Alignment Whole deviation Comparison Point Report Add inspection entities not support with CATIA

  7. Consumer Product Import Scan data.. XOV2 update all inspection entities and report automatically

  8. Consumer Product • Report

  9. Rapidform Products One and Only Software to Create Parametric CAD model from 3D scan data • Next generation total RE Solution • Turn raw scan data into water-tight clean meshes, NURBS patches, or fully editable Solid/Surface models. • Rebuild original design intent, not only shape • State-of-the-art tools to find out design intent implied in geometry with a click of button such as revolving profile, drafting angle, pipe center lines, varying fillet radius, drill parameters, and dozens more. • Many times faster than existing solutions • Unique automated tools such as Mesh Buildup Wizard, Lofting Wizard (auto lofting), CAD-Correct, etc. can save thousands % of redesign time compared to any other processes. • Maintain confidence with real time accuracy checker • With Accuracy Analyzer™ , you can check the deviation between scan data and redesigned bodies in real time whenever you adjust feature parameters as adding or editing features in 2D sketch, 3D sketch, and solid/surface modeling • Familiar interface for CAD users • History based solid and surface modeling is fully supported with commonly adopted GUI layouts which can reduce learning curve. • Transfer the design history to your CAD environment • As well as exporting dumb solid/surface bodies, XOR enables you to reconstruct feature modeling history in SolidWorks, Pro/E, and UG NX through liveTransfer™ technology. • Who is it for? • All RE prospects going into solid modeling CAD • All RE prospects with prismatic & hybrid parts

  10. Rapidform Products World’s First Macro-free Parametric Inspection from 3D Scan Data • Accuracy, Accuracy, Accuracy! • German PTB, American NIST and British NPL certified geometric calculation engine embedded. Provable higher accuracy and repeatability than any other 3D scanning software. Real Scan-to-CAD geometry analysis without any geometry approximation • Verify As-Built • Parts3D scan virtually any part, and generate color map deviation analysis in minutes. Compare parts to CAD models or to other scans • Inspect Quickly with Guided Scanning & Auto Calc • Shop floor friendly with easy on-screen instructions for pre-planned inspection routines. Generate complete inspection reports, including color maps and GD&T, with one click • Perform Sophisticated GD&T Easily • Measure and tolerance parts with just a few clicks. Every measurement becomes a repeatable routine, without any programming • Share Inspection Results & Collaborate On-line • Easily share results with colleagues with interactive 3D models in a web browse. Publish PDF, PowerPoint, Excel and text reports, with interactive 3D images and detailed reports • Use Data from 3D Scanners and Other Devices • Combine data from multiple sources, including CMMs, trackers and articulating arms Scan and generate results in real time with liveInspect™ and liveScan™ • Who is it for? • Companies moving from CMM to scanning for metrology • First article and next-to-line inspection

  11. Rapidform Products 2nd Generation, non-parametric /non-mechanical reverse engineering software • All automated • Aligning unordered raw scan data • Cleaning and perfecting defective scan data • NURBS patch network conversion from mesh • Cross section and Feature curves from mesh • Perfect solution for 2nd / 2.1 generation process • Functional equivalent of 2nd generation RE Tools • Quality mesh creation for milling, RP, or archiving • Dumb NURBS model creation for milling, quick CAE, or simulations • Cross sectioning for further modeling in CAD systems • Who is it for? • RE prospects who don’t need a CAD solid • RE prospects with artistic & organic parts that have no CAD design intent

  12. Thank you !!!

More Related