1 / 36

More Control Charts

More Control Charts. Module 6. Why?. There are many probability distributions in our world. The Binomial Distribution, The distribution of coin tosses. Two types of data. Variables----Continuous Attributes—Discrete, Countable Two types of attributes data

aira
Download Presentation

More Control Charts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. More Control Charts Module 6

  2. Why? There are many probability distributions in our world

  3. The Binomial Distribution, The distribution of coin tosses.

  4. Two types of data • Variables----Continuous • Attributes—Discrete, Countable • Two types of attributes data • You can count occurrences and non-occurrences. • You can only count occurences. Examples?????

  5. Some Variables Shewart Charts • X-mR aka i-Chart, Individuals Chart • X-bar-range • X-bar-sigma

  6. Some Attributes Shewart Charts • p-Chart • np-Chart • u-Chart • c-Chart

  7. Decide on type of data Continuous (Variables) Data Discrete (Attributes) Data Can both occurrences & non-occurrences be counted? Yes More than one observation per subgroup? No No Yes < 10 observations per subgroup? Are there equal area of opportunity? Are the subgroup sizes equal? Yes No Yes No No Yes –R –s XmR c-chart u-chart p-chart np-chart

  8. Example Individuals Chart

  9. Example X-Range Chart

  10. Example X-Sigma Chart

  11. How did they do that?

  12. The basic pattern…. • Plot observed measurements over time. • Measurements, counts, rates • Plot Centerline • Average measurement or count, pooled rate. • Plot Control Limits • Centerline +/- Multiplier X “Standard Deviation”

  13. Multiplier does 3 Things • Determines the number of sigmas • usually 3 • Converts standard deviations to standard errors (variables data). • Can include factor to adjust for unusually small or large number of subgroups or time intervals. Note: How multiplier is constructed and used varies by author.

  14. “Standard Deviation” • Based on sample estimate of population standard deviation. • Based on moving ranges. • Based on ranges.

  15. The i-Chart or XmR Chart • Calculate average of all individual values = x • Calculate all the moving ranges (MRi) • MRi = |xi-xi-1| • Calculate the average MR = Rbar • Calculate control limits = xbar +/- 2.66Rbar • Plot xbar • Plot control limits • Plot individual values, points

  16. The Xbar-Range Chart

  17. The Xbar-Sigma Chart

  18. The Xbar-Sigma Chart (Part II)

  19. Is “3” always OK? • Notice 3 is multiplied by the SD. • This gives +/- 3 Sigma Control Limits. • Designed for 25 observations. • When you have only 7 observations • β risk is too high • When you have 200 observations • α risk is too high • Can use T-Sigma Limits

  20. T-Sigma Limits

  21. How to use T-Sigma Limits • Substitute the T-Sigma limit from the table for the “3” in A3, B3, and B4 above. • For attributes charts, simply substitute the T-Sigma Limits for the multiplier in front of the standard error.

  22. The attributes Shewart Charts • p-Chart • np-Chart • u-Chart • c-Chart

  23. Example p-Chart

  24. Example np-Chart

  25. Example u-Chart

  26. Example c-Chart

  27. How did they do that?

  28. The p-Chart

  29. The np-Chart Pooled over all subgroups

  30. The c-Chart

  31. The u-Chart

  32. Choosing Charts • Continuous A. Only 1 observation per subgroup—use iChart B. More than 1 observation/subgroup i) Less than 10 observations/subgroup—use Xbar-R ii) 10 or more observations/subgroup--use Xbar-Sigma 2. Attributes A. Occurrences (heads) and non-occurrences (tails) can be counted. i) Subgroups of equal size—use np-Chart Ii) Subgroups of unequal size—use p-Chart B. Only occurrences can be counted. i) Equal area of opportunity (denominators)—use c-Chart ii) Unequal area of opportunity– use u-Chart

  33. See Flow Chart onpage 72 of Carey and Lloyd Decide on type of data Continuous (Variables) Data Discrete (Attributes) Data Can both occurrences & non-occurrences be counted? Yes More than one observation per subgroup? No No Yes < 10 observations per subgroup? Are there equal area of opportunity? Are the subgroup sizes equal? Yes No Yes No No Yes –R –s XmR c-chart u-chart p-chart np-chart

More Related