0 likes | 22 Views
Norwegian Technology in India<br>For uniform aeration <br>All across any aquaculture farm<br><br>To know more call us at: <br> 91 u2013 9652122060<br>Email: marketing.airoxitube@gmail.com<br> info@airoxi.com<br> www.buy.airoxi.com
E N D
Presents Norwegian Technology in India For uniform aeration All across any aquaculture farm www.Airoxi.com
LARGE AQUA FARMS OF MORE THAN 2 ACRES, NEED INTENSE AERATION • Often aeration system is installed in the periphery • However large farms of more the 2 acres, for species such as Vannamei, need a very efficient aeration system with very small bubbles • Aeration needs to be more uniform without any dark areas with DO low • So aeration only in the corners with a paddle wheel aeration system or with a regular aeration is not sufficient
MORE REASONS WHY INTENSE AERATION IS NEEDED IN LARGE FARMS • Oxygen levels drop at high temperatures in summer/early autumn • This reduces Feed Conversion Efficiency, increases mortality and negatively impacts growth rate
Identifying this aeration need of farmers, AirOxi is proud to offer the AirX – the latest Norwegian Technology in India A special double walled EPDM tube that has very fine bubbles www.airoxi.com
AirX Advantages • Solves the problems arising from oxygen deficiency • Automated system manages air according to oxygen saturation in the water • Oxygenates large areas - ponds and fish cages • Homogenous distribution of oxygen (not only at surface) • Direct diffusion in areas where oxygen is most needed • No upwelling currents (increases contact time/transfer efficiency) • Can be used for routine oxygenation in fish farms
AIRX TUBE TECHNICAL DETAILS.. • Material – EPDM double walled tube • Safe to use with most liquids • Dimensions – Inside diameter – 12 mm. Outside Diameter – 20 mm • Compatible fittings - Fittings of ½” / 16 mm • Standard roll length – 100 mtr • Usage - Compatible for wide range of industrial, commercial, aquaculture in fresh, brackish or salt water, as well as effluent and sewage applications
..AIRX TUBE TECHNICAL DETAILS • Air Flow – Optimum – 5 LPM / 0.3 m3/hr Maximum – 15 LPM / 0.9 m3/h3 • Holes – Micro holes of 0.2mm, all around periphery and in both inner and outer tubes • Usage length – Flexible and can be made into any grid or shape • Maximum length with single injection of air will depend on depth of installation and air pressure • Due to double wall holes, long lengths are possible with minimum reduction in pressure along the length unlike in single wall diffuser
Phone: +91 9652122060 Email: info@airoxi.com Thank you website: www.buy.airoxi.com How to reach us