1 / 24

Chemical Drainage New Welder Demo 12/14/07

Chemical Drainage New Welder Demo 12/14/07. New Features. Lighter more compact design Built into Case Data-logging feature More advanced power compensation Software updates can be done in field Calibration every 12 - 24 months. Keypad/Screen. Initial Power-On. Software Revision.

alanna
Download Presentation

Chemical Drainage New Welder Demo 12/14/07

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chemical Drainage New WelderDemo 12/14/07

  2. New Features • Lighter more compact design • Built into Case • Data-logging feature • More advanced power compensation • Software updates can be done in field • Calibration every 12 - 24 months

  3. Keypad/Screen

  4. Initial Power-On Software Revision

  5. Initial Power-On • Second Screen shows contact information

  6. Main Menu • After initial power-up the unit will default to the main menu • From this screen user can select “A” to weld a joint or “D” for other options (i.e. software update) • Can come back to this screen anytime by pressing the main menu key

  7. Welding Procedure • Select “A” using the keypad

  8. Welding Procedure Cont. • Unit will prompt for job information for data logging • Only enter once on power-up or after returning to the main menu (Can press “Accept” to skip over) • Will Retain information until changed • Enter name using standard text messaging practices then press “Accept” key

  9. Welding Procedure Cont. • Enter Job location and press “Accept” key (Can press “Accept” to skip over)

  10. Welding Procedure Cont. • Enter a Job Reference if desired and Press “Accept” Key (Can press “Accept” to skip over)

  11. Welding Procedure Cont. • Unit will prompt user to connect the fittings

  12. Welding Procedure Cont. • Unit will prompt for what group of fitting you are welding • 1 ½” – 4” • 6” • Any combination of 1 ½” – 4” can be welded at the same time • 6” joints will be welded by themselves (2 joints at a time) Choose

  13. Welding Procedure Cont. • Once Size selected Press the “Start” Key

  14. Welding procedure Cont. • If an error should occur the unit will alarm and show it on the screen as shown below. • See the user manual for a complete list of possible errors

  15. Download Data log • Insert USB Memory Key (included) into USB port on machine

  16. Download Data log Cont. • At main menu Press “D” For options

  17. Download Data log Cont. • Press “A” for Download Log

  18. Download Data log Cont. • Unit will Download the Log onto the USB key. Then ask if you want to reset the log. If yes press “A” if no press “D ” then disconnect the memory key

  19. Download Data log Cont. • Plug USB key into computer and open downloaded file

  20. 0: Weld OK 1: Stuck button on start up 2: Output fault before weld start 4: No calibration 5: Case temperature sensor fault (if fitted) 6: Case temperature out of limits (if fitted) 10: Low supply frequency <40Hz 11: High supply frequency >70Hz 12: High supply voltage >140v 13: Low supply voltage <95v 14: Relay failed to latch on weld start 20: Welding current Excessive (>150%) 21: Welding current High (>125%) 22: Welding current High (>112.5%) 23: Welding current High (>106.25%) 24: Welding current High (>101.5%) 25: User stop button pressed 26: Relay unlatched 27: Fitting open circuit 28: Welding current Low (<98.5%) 29: Welding current Low (<50%) 126: Cooling time failure 127: Power off failure. Possible Error Codes

  21. Other Options • At main menu Press “D” For options

  22. Other Options Cont. • Press “D” for More

  23. Other Options Cont. • Enter appropriate code from list in users manual and press “Accept” • Follow on screen Instructions

More Related