1 / 18

بسم الله الرحمن الرحيم Advanced Control Lecture two

بسم الله الرحمن الرحيم Advanced Control Lecture two. 1- A modeling procedure ( Marlin, Chapter 3 ) 2- Empirical modeling ( Smith & Corripio , Chapter 7 ) 3- Control valve: Action, characteristics and capacity ( Smith & Corripio , Chapter 5 ).

albin
Download Presentation

بسم الله الرحمن الرحيم Advanced Control Lecture two

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. بسم الله الرحمن الرحيمAdvanced ControlLecture two 1- A modeling procedure (Marlin, Chapter 3) 2- Empirical modeling (Smith & Corripio, Chapter 7) 3- Control valve: Action, characteristics and capacity (Smith & Corripio, Chapter 5) Lecturer: M. A. Fanaei Ferdowsi University of Mashhad

  2. We can tune the controller only after the process steady-state and dynamic characteristics are known. Types of model 01_5 Modeling (relation between inputs and outputs of process) • White box (first principles) n black box (empirical) • Linear n non-linear • Static n dynamic • Distributed n lumped • Time domain n frequency domain • Continuous n discrete For further reading refer to :Roffel & Beltlem, “Process dynamics and control”, Wiley, 2006

  3. A modeling procedure • 1. Define goals • Specific design decisions • Numerical values • Functional relationships • Required accuracy • 2.Prepare information • Sketch process and identify system • Identify variables of interest • State assumptions and data • 3.Formulate model • Conservation balances • Constitutive equations • Rationalize • Check degrees of freedom • Dimensionless form • 4.Determine Solution • Analytical • Numerical • 5. Analyze results • Check results for correctness • Limiting and approximate answers • Accuracy of numerical method • Interpret results • Plot solution • Characteristic behavior • Relate results to data and assumptions • Evaluate sensitivity • 6. Validate model • Select key values for validation • Compare with experimental results • Compare with results from more complex model

  4. F F CAo V CA Example 1. Isothermal CSTR • Define Goals • Dynamic response of a CSTR to a step in the inlet concentration. • The reactant concentration should never go above 0.85 mole/m3 • When the concentration reaches 0.83 mole/m3, would a person have enough time to respond? What would a correct response be? • The system is the liquid in the tank (as shown in Fig.). • The important variable is the reactant concentration in the reactor. Prepare Information

  5. F F CAo V CA Example 1. Isothermal CSTR Prepare Information … • Assumptions • Well-mixed vessel • Constant density • Constant flow in • Constant temperature • Data • F = 0.085 m3/min , V = 2.1 m3 • (CAo)initial = 0.925 mole/m3 ,DCAo = 0.925 mole/m3 • The reaction rate is rA = -kCA , with k = 0.04 min-1

  6. F F CAo V CA Example 1. Isothermal CSTR Formulate Model • Material balance: • Rationalize : • Degrees-of-freedom: One equation, one variable(CA), two external • variables (F and CAo) and two parameters (V and k). • Therefore the DOF is zero, and the model is exactly specified.

  7. F F CAo V CA Example 1. Isothermal CSTR Analytical Solution

  8. Example 1. Isothermal CSTR

  9. Empirical Modeling (Step Testing) Step Change Record Process Sensor/ Transmitter Final Control Element m(t), % c(t) , % Process Gain:

  10. FOPDT Model Fit 1 :

  11. FOPDT Model Fit 2 :

  12. FOPDT Model Fit 3 :

  13. Control Valve m(t) vp(t) Cv(t) f(t) Control Valve Action Control Valve Characteristics Control valve Capacity

  14. Control Valve • Control Valve Action is selected based on safety consideration • Fail-Closed (FC) or Air-to-Open (AO) : • Fail-Open (FO) or Air-to-Close (AC) : τv : Time constant of valve actuator (3-6 sec for pneumatic actuator) The gain of FC (AO) valve is positive The gain of FO (AC) is negative

  15. Control Valve • Control Valve Characteristics • Linear • Quick-opening • Equal percentage Rangeability parameter (50 or 100)

  16. Control Valve Control Valve Characteristics : How we must select the correct valve characteristics (Linear or Equal percentage) The correct selection requires a detailed analysis of the installed characteristics • As a rule of thump: • Choose a linear valve if at design conditions the valve is taking more than half of the total pressure drop (Δpv > 0.5 Δpo ). • Choose an equal percentage valve if at design conditions the valve is taking less than half of the total pressure drop (Δpv < 0.5 Δpo). • Equal percentage valves are probably the most common ones.

  17. Control Valve Control Valve Capacity The control valve capacity is : The flow in U.S. gallons per minute (gpm) of water that flows through a valve at a pressure drop of 1 psi across the valve Liquid Flow: Where: f(t) = volume flow rate (gpm) Δpv = presuure drop across the valve (psi) Gf = specicific gravity

  18. Control Valve Control Valve Capacity • Gas Flow • Subcritical flow: • Critical flow: • Where: • fs (t) = Gas volume flow at standard conditions,14.7 psia & 60 oF (scfh) • Cf = Critical flow factor (0.6 – 0.95 , typically 0.9) • p1 = Pressure at valve inlet (psia), T = Tempreture at valve inlet (oR) • G = Gas specific gravity

More Related