1 / 6

Beam Tilt & TFC: Which z value for correction?

Beam Tilt & TFC: Which z value for correction? 1. Standing plan : correct using barrel of innermost hit 2. Alternate: also use barrel-crossing pattern Compare means of d z = track – barrel center for both 1 and 2. ZH-> nn bb no beam tilt 6 for barrels 3 summary

aleshia
Download Presentation

Beam Tilt & TFC: Which z value for correction?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Beam Tilt & TFC: Which z value for correction? 1. Standing plan: correct using barrel of innermost hit 2. Alternate: also use barrel-crossing pattern Compare means of dz = track – barrel center for both 1 and 2. JDH, STT meeting

  2. ZH->nnbb no beam tilt 6 for barrels 3 summary no tilt, expect r =0 f = random <b>, mm B1 B2 B3 f (degrees) B4 B5 B6 r, mm f, rad z, cm b, mm JDH, STT meeting

  3. Tilt sample (Lorenzo) x, y=.5 mm/cm so expect mr=.7 mm/cm <b>, mm B1 B2 B3 f (degrees) B4 B5 B6 r, mm f, rad z, cm b, mm JDH, STT meeting

  4. Tilt sample, again after applying barrel correction expect mr= 0 mm/cm f= random find, m consistent w/0! Slightly better b JDH, STT meeting

  5. Tilt sample, again after applying barrel+layer correction expect mr= 0 mm/cm f= random find, m consistent w/0! Slightly better b JDH, STT meeting

  6. Conclusions - either correction method alone beats none - negligible differences between the two methods - similar fit probabilities for flatness - identical impact parameter widths - barrel-only slightly better - slightly less physics dependence - simpler So stick with barrel only correction… ? JDH, STT meeting

More Related