1 / 7

Rubber O-ring and silicon component manufacturer – Delivering customized solutions

Rubber O-rings are mechanical gaskets used to prevent leaks in gas and fluids. It is manufactured from different types of elastomers

alfarubberAR
Download Presentation

Rubber O-ring and silicon component manufacturer – Delivering customized solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rubber O-ring and silicon component manufacturer – Delivering customized solutions

  2. Types of Elastomers Rubber O-rings are mechanical gaskets used to prevent leaks in gas and fluids. It is manufactured from different types of elastomers. There are many types of O-ring materials and these include: • Neoprene • Nitrile • PTFE • RPDM Rubber • Fluorocarbon • Silicone

  3. For high temperature applications Silicone is commonly used. • Rubber O-ring and silicon component manufacturer delivers both custom standard and industry standards. • The size may vary depending on the type of the product selected. • The O-rings are available in different size, materials, profiles and durometers.

  4. O-Ring material selection • There are many types of materials available and each has different applications and features. • Certain materials improve performance in high heat and chemical applications while others deteriorate under tough operating conditions. • The O ring compatibility is determined by the type of chemicals and oils used. • Both tear resistance and abrasion is important especially in dynamic applications.

  5. Primary considerations of O ring material selection • Temperature compatibility • Durometer • Size • Cost • Chemical compatibility • Sealing pressure Based on the applications, electrical properties, tear resistance, dynamic resistance and ozone resistance are considered. The parameters are taken into consideration while making a choice.

  6. Types of O-Ring applications and their impact • Static Axial Seal groove is designed after taking into consideration the pressure coming from inward or outward. For outward pressure the outside diameter is considered and for inward pressure, inside diameter is crucial. • Reciprocating dynamic seals are used for pneumatic or hydraulic piston. For short strike smaller diameter is used and for longer stroke thicker cross section is used. • Rotary seals are reliable under adequate conditions like durometer, feet per minute values and hardware configuration matches. For shaft hardness value of 55 Rockwell is required for the success of the O-Ring. There are specialized O-Ring compounds for rotary service.

  7. For More Details: ALFA RUBBER & SPRINGS PRIVATE LIMITED • Phone: 91-44-27922057 • Website: http://alfarubber.com/

More Related