Diesel Watches For Men

1. 5 Things To Avoid If You Own Diesel Men’s Watches

2. About Us Ensure that your timepiece is always in the best condition by servicing it regularly, preferably once in a year. For the rest of the day's, cross-check its various parts, keep it neat, and avoid the following mistakes.

3. Wearing a watch underwater Even with a waterproof casing, water can seep through a chronograph. If you have to track time while below the ocean, what you need is a uni-directional bezel. If the pushers are pressed inside a pool of water, the seal can break and allow in water to create rust inside the movement. The dial is also prone to water damage and gets discolored easily. A rotating bezel prevents water damage when submerged. Ensure that the pushers are screwed down tightly or ask help from a professional watch repairer.

4. Forcing the crown back in Some Diesel watches for men have screw-down crowns which must be closed with a lot of caution. If jammed, the crown gets a permanent damage. You should always ensure that it is in the correct alignment so that it doesn’t allow some space for water to get through. Cross-threading the crown happens when you don’t take your time to screw it back in and this makes it to jam. Basically, a crown revolves in 1.5 turns and it can even go up to 3 turns. Do not screw it extremely tight because you won’t be able to unscrew it.

5. Magnetic fields exposure This is one way that renders your luxurious watch useless. Once a watch is exposed to magnets, it starts to error and eventually stops functioning. This can occur when the watch’s escapement stops controlling the oscillations to maintain proper time. For these reasons, you should avoid putting your watch on top of electronic machines, woofers, radios, phones, etc. lest you damage the movements. However, new technology has led to production of anti-magnetic features which can be used inside the movements.

7. Poor storage Extreme temperatures affect the gaskets and movements. If you abruptly move your watch from cold to hot condition, the expansion causes moisture to get into the dial and damage it. Heat dries up the lubricant hence increasing friction between gears. The best storage condition is under room temperature. If you are travelling to places in extreme climate, take the watch to be serviced to make sure that its seals are tightened.

8. Winding on your wrist Most men find it easier to set the time while wearing the watch. This can easily pull out the crown. If you over-wind it, the movement gets pressurized and this is not a good thing. You must always take off the watch from your wrist before winding and setting the time. This will enable you feel the resistance and use the right angle as you pull out the crown. If you don’t want to incur heavy costs or repair, you must learn how to keep your luxury watch safe.

9. Contact Us Email Id: info@thewatchesmen.com Call us at: +64211-888-603 Visit Us at: https://www.thewatchesmen.com/

10. Thank You