1 / 6

How can I boost Wi-Fi speed of a Netgear router?

If you need help to do so then Netgear Technical Support USA (425) 549-3111<br>Click here:- https://technical-helpline-number.com/netgear-support.html

alixnoe3
Download Presentation

How can I boost Wi-Fi speed of a Netgear router?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How can I boost Wi-Fi speed of a Netgear router? Netgear Router Customer Support (425) 549-3111

  2. If you are looking to boost the Wi-Fi speed on a Netgear router then, following steps will help you in enabling this process. If you need help to do so, then, Contact Netgear Support team.

  3. Steps to follow: • First, you need to open its web browser and there you have to enter http://192.168.1.1 or http://192.168.0.1 into its address bar and go to the second address if it doesn’t work. • Next, you’ll need to enter “admin” as its default username and “password” as its default password and then, you have to press “Login.” • After that, you can choose “wireless settings” from under setup and then, you need to press on the fastest speed from its mode drop-down menu. • Now you have to press “Apply” and then, press “Start” button and then, you have to type “cmd’ and then, you’ll need to press “Enter” in order to open its “Command Prompt.” • Next, you need to enter “ping www.google.com – f-11500” into CMD and then, you have to press “Enter.” • When you do so, you can review its results if a message comes “Packet needs to be fragmented but DFset” appears, run a ping command again and this time to reduce the buffer size by 10.

  4. Steps to follow: • Now you can repeat this above-given step until its ping stats reports zero packets lost. • Now come back to its browser and there, you have to choose “WAN Setup” from under Advanced and then, you have to enter MTU size section and a buffer size from step 6. • Next, you have to press “Apply” and come back to command prompt and next, you need to enter the given command. • Nets interface ipv4 set sub interface"Wireless Network Connection"mtu=[#] store=persistent • Replace “(#)” with a correct buffer size and then, you have to press “Enter” in order to change the MTU value so that it can match with the router and restart your PC.

  5. In case, you stuck somewhere and you need help in this regard then, make a call to Netgear Support Number USA (425) 549-3111. Experts are available to help you out. Source Thank you

More Related