40 likes | 46 Views
Champion Pump Service Kits is one of the best pumps it used across the world. It is well-known for creating less friction which equals less wear, no carbon deposit build-up in valves or rings, creates thermal stability and solvency, less impact on the environment, saving on labour and disposal cost. More info at https://www.allaircompressorparts.com/z11883championr30pumpservicekit.aspx
E N D
Maintenance Tips for Champion Pump Service Kits Champion Pump Service Kits is one of the best pumps it used across the world. It is well-known for creating less friction which equals less wear, no carbon deposit build-up in valves or rings, creates thermal stability and solvency, less impact on the environment, saving on labour and disposal cost. Now let us look at the important maintenance tips for Champion Pump Service Kits: 1.Daily maintenance – It is crucial to check the oil level of both compressor and engine if it is equipped. Adding the quality air compressor lubricant as needed. 2.With that, make sure to drain the moisture from the tank by opening the tank drain valve that is located in the bottom of the tank. 3.Stop, look, and listen for any unusual noise, failure to compress, overheating, vibrations, or belt slippage, and improve before it gets damaged. 4.Switch off the compressor at the end of each day’s operation.
Now coming to the weekly maintenance: 1.Clean the dust and foreign objects from the cylinder head, motor, fan blade, airlines, intercooler, and tank. 2.Remove and clean intake air filters 3.Check V-belts for tightness which must be tight enough to transmit the necessary power to the compressor. With that, don’t forget to adjust the V-belts as follows: a)Remove bolts and guard to access compressor drive b)Loosen the mounting hardware securing its motor to the base c)Verify the manufacturer’s specifications for the correct belt tension. d)Check the alignment of pulleys, and adjust if necessary Now let us look at the maintenance of Champion Pump Service Kits every 90 days: 1.Change or replace the crankcase oil and type and grade oil as specified 2.Check the entire system for air leakage around connections, and gaskets hat uses an ultrasonic leak detector while using soap solution and brush. 3.Tighten the nuts and cap-screws as needed 4.Pull ring on all pressure relief valves to assure proper operation fittings,
Visit us at https://www.all aircompressorp arts.com/conta ct-us.aspx Call:636-496- 7991 Email: steve@allairco mpressorparts.c om GET IN TOUCH