50 likes | 71 Views
NUUO IO Device. This is. Install IO Device. MPEG-4 Series. IO Card. PCI. PCI. RS485. Capture Card. H.264 Series. IO Box. Converter. RS485. RS485. USB. Open Main Console > Config > Setting > I/O Device 1. Module Setting Enter Module name of device Choose Device model
E N D
NUUOIO Device This is
Install IO Device MPEG-4 Series IO Card PCI PCI RS485 Capture Card H.264 Series IO Box Converter RS485 RS485 USB
Open Main Console > Config > Setting > I/O Device 1. Module Setting • Enter Module name of device • Choose Device model • Refer IO Box or IO Card • Set COM Port of device • My computer > manage > Computer management > Device Manage > Ports (COM & LTP) • It’s will show Prolific USB-to-Serial Comm Port (COM3) 1
Set ID of device • Right Check on Device and choose properties > Port Setting > Check Bits per second (Baud Rate) It will get Baud rate • Use Tool “IOConfig.exe” to get ID information • Input COM port, Baud rate, and set Starting address from “0”. • And click “scan” to search. • The Address “0” will show as below Right Click
2. I/O Device List • Show device already installed in system • Choose device 3. Device Setting • Modify name • Set I/O state • N/C : normal Close • N/O : normal Open 4. Digital input Monitor • It will become red when signal input 5. Digital output simulation • Click to send output signal • It will become red 3 2 4 5