Josren Ventures Company (JVC) Limited, Takoradi Workshop

1. Josren Ventures Company (JVC) Limited, Takoradi Workshop

2. Site location

3. Site layout • Phase 1, 2015 • workshop • machines • equipment • growing line • blasting • painting • office facilities • Phase 2, 2016 • assembly workshop • high tolerance fabrication • prefabrication tanks, pipelines and vessels • Phase 3, 2016/2017 • zinc coating • heat treatment

4. Workshop, General View

5. Plate Roller, Faccin HAV 3165 • Variable geometry with three moveable rolls • Linear Slides for roll movement (RGS) • Induction hardened and surface polished rolls • Electronic Balance System (EPS) • Special Breaking System for pre-bending • Cone bending attachment • Control console moveable on wheels • Centralized Lube system (pump) • Siemens Numerical Control Unit • Safety Guard cable around machine • Side and to plate supports • Support boom for 6 m radius • Machine CE certified for safety

6. Profile Roller Faccin RMCI 110 • Universal rolls for rolling all standard sections • Motorized fine adjustment for universal roll height • Independent adjustment of the bending rolls (double pinch) • External guide rolls independently adjustable in six directions • Simultaneous translating and rotating movements for bending rolls • Infinitely variable rotation speed for interpolation between different radii • Automatic hydraulic compensation of rolls rotational speed • Three independently driven shafts with torque expander • Three hydraulic motors and three planetary gearboxes for rolls rotation • Special high resistance heat treated forged steel used for rolls • Roll shafts made of NiCrMo alloy steel hardened and ground • High load over-dimensioned bearings • Machine CE certified for its safety

7. Plasma Cutting Machine, Esab Phoenix PXE 4500

8. Band Saw, Bomar 720.540 DGH • Program controlled 60° two-sided double bevel • Fully automatic double-bevel band saw machines with a bevel range of 60° on both sides. Individually configurable feed lengths to 6,000 mm and graphical, dialog-based operator prompts offer a wide range of applications. • Continuous two-sided bevel cuts to 60° • Material tension always under 90° to the contact axis, even with bevel cuts • Integrated material rollers up to the saw machine's support tables • Large, precise V-guide block for the adjustable saw band guide arm • Powered shavings brushes always synchronized to the saw band speed • Large, easily visible bevel scale readable right from the pivoting console • Vice with full-lift cylinder and special adjustable guide on hardened, ground rails

9. Lathe, Pro Takang TK 840x3000 • Conventional Lathe for high speed operation • Capacity • Swing over bed 840 mm • Swing over cross slide 630 mm • Swing over gap 1060 mm • Centre height 420 mm • Gap width from spindle nose 460 mm • Between centres 2000 mm, 3000 mm, 4000 mm, 5000 mm • Bed width 400mm/460 mm • Weight cap between centres 2800 kg

10. Milling machine, Accutec 2500 M • Standard Features • Rapid traverse on "X", "Y" & "Z" axis. • Via inverter variable feeding on "X", "Y" & "Z" axis. • High quality meehanite casting body GC-45/DIN-40. • All gears & shafts are hardened & ground. • Table swivels ±45° degrees left & right. • All "X", "Y" & "Z" wider square slide ways & tablesurface are hardened & ground. • Motorized ARM/RAM elec. Motor is 3.75KW (5.5HP) • Horizontal spindle elec. Motor is 5.5KW (7.5HP) • All square slide way & dovetail way are bigger &stronger. • Cast iron is either ASTM No. 40/meehanite GC-45 orDIN GG-40

11. Drilling machine, Opti B50 GSM • Heavy gear drilling machine with coolant system and threading mechanism as well as automatic spindle sleeve feed • Heavy solid cast iron construction • Very smooth running due to ground oil-quenched gear wheels • High true running accuracy due to hardened and ground work spindle • Two-stage driving motor • Automatic toothed wheel lubrication via oil pump • Threading unit • Lockable main switch and motor protection switch • Machine luminaire integrated in the drill head

12. Press brake, Vakomet KR1000 • Strong structure with hydraulic adjustment of pressing power • Standard supplies: • V-pieces • Height adjustment of table • Groove for fastening of work pieces • Punch • Hydraulic piping • Power gauging • Technical data • Pressing Power: 1000 kN • Stroke length: 300 mm • Pressing speed: 6 mm/s • Motor power: 5,5 kW • Oil tank: 40 l • Weight: 942 kg

13. Welding machines MIG/MAG welding machines, 21 pcs SAW Tractor, 5 pcs Welding towers which will be part of growing line for assembly of e.g. Anchor Suction Piles

14. First project, fabrication of Foundation Module Supports for FPSO Fabrication on-going • Fabrication of 122 pcs of Foundation Module Supports for OCTP, FPSO project • Total weight 250 ton Supports arrived in Singapore Supports ready for transportation

15. Next projectstarting up, OCTP FPSO 6 pcs of Anchor Suction Piles Top can Growing line assembly Padeye plate, 75 mm thickness Plate rolling

16. Contact Information Mr. Joseph Quashie, CEO email:j.quashie@jvclimited.com.gh phone: +233 244 060 000 Mr. Tom Främling email:t.framling@jvclimited.com.gh phone: +233 544 324 919

17. RANDOM WORKSHOP PICTURES

18. Workshop, General View

19. Machines and Equipment

23. THANK YOU