800 likes | 1.65k Views
Advanced Thermodynamics Note 10 Solution Thermodynamics: Theory. Lecturer: 郭修伯. Compositions. Real system usually contains a mixture of fluid. Develop the theoretical foundation for applications of thermodynamics to gas mixtures and liquid solutions Introducing chemical potential
E N D
Advanced ThermodynamicsNote 10Solution Thermodynamics: Theory Lecturer: 郭修伯
Compositions • Real system usually contains a mixture of fluid. • Develop the theoretical foundation for applications of thermodynamics to gas mixtures and liquid solutions • Introducing • chemical potential • partial properties • fugacity • excess properties • ideal solution
Fundamental property relation • The basic relation connecting the Gibbs energy to the temperature and pressure in any closed system: • applied to a single-phase fluid in a closed system wherein no chemical reactions occur. • Consider a single-phase, open system:
Define the chemical potential: The fundamental property relation for single-phase fluid systems of constant or variable composition: When n = 1, Solution properties, M Partial properties, Pure-species properties, Mi The Gibbs energy is expressed as a function of its canonical variables.
Chemical potential and phase equilibria • Consider a closed system consisting of two phases in equilibrium: Mass balance: Multiple phases at the same T and P are in equilibrium when chemical potential of each species is the same in all phases.
Partial properties • Define the partial molar property of species i: • the chemical potential and the particle molar Gibbs energy are identical: • for thermodynamic property M:
and Calculation of mixture properties from partial properties The Gibbs/Duhem equation
Partial properties in binary solution • For binary system Const. P and T, using Gibbs/Duhem equation
The need arises in a laboratory for 2000 cm3 of an antifreeze solution consisting of 30 mol-% methanol in water. What volumes of pure methanol and of pure water at 25°C must be mixed to form the 2000 cm3 of antifreeze at 25°C? The partial and pure molar volumes are given. Fig 11.2
The enthalpy of a binary liquid system of species 1 and 2 at fixed T and P is: Determine expressions for and as functions of x1, numerical values for the pure-species enthalpies H1 and H2, and numerical values for the partial enthalpies at infinite dilution and
Relations among partial properties • Maxwell relation:
Ideal-gas mixture • Gibbs’s theorem • A partial molar property (other than volume) of a constituent species in an ideal-gas mixture is equal to the corresponding molar property of the species as a pure ideal gas at the mixture temperature but at a pressure equal to its partial pressure in the mixture.
For those independent of pressure, e.g., For those depend on pressure, e.g., or From integration of
Fugacity and fugacity coefficient • Chemical potential: • provides fundamental criterion for phase equilibria • however, the Gibbs energy, hence μi, is defined in relation to the internal energy and entropy - (absolute values are unknown). • Fugacity: • a quantity that takes the place of μi With units of pressure
Fugacity coefficient Residual Gibbs energy
VLE for pure species • Saturated vapor: • Saturated liquid: VLE For a pure species coexisting liquid and vapor phases are in equilibrium when they have the same temperature, pressure, fugacity and fugacity coefficient.
Fugacity of a pure liquid • The fugacity of pure species i as a compressed liquid: Since Vi is a weak function of P
For H2O at a temperature of 300°C and for pressures up to 10,000 kPa (100 bar) calculate values of fiand φi from data in the steam tables and plot them vs. P. For a state at P: For a low pressure reference state: The low pressure (say 1 kPa) at 300°C: For different values of P up to the saturated pressure at 300°C, one obtains the values of fi ,and hence φi . Note, values of fi and φi at 8592.7 kPa are obtained Values of fi andφi at higher pressure: Fig 11.3
Fugacity and fugacity coefficient: species in solution • For species i in a mixture of real gases or in a solution of liquids: • Multiple phases at the same T and P are in equilibrium when the fugacity of each constituent species is the same in all phases: Fugacity of species i in solution (replacing the particle pressure)
The residual property: The partial residual property: For ideal gas, The fugacity coefficient of species i in solution
Fundamental residual-property relation G/RT as a function of its canonical variables allows evaluation of all other thermodynamic properties, and implicitly contains complete property information. The residual properties: or
Fix T and composition: Fix P and composition: Fix T and P:
Develop a general equation for calculation of values form compressibility-factor data. Integration at constant temperature and composition
Fugacity coefficient from the virial E.O.S • The virial equation: • the mixture second virial coefficient B: • for a binary mixture: • n mol of gas mixture:
Similarly: For multicomponent gas mixture, the general form: where
Determine the fugacity coefficients for nitrogen and methane in N2(1)/CH4(2) mixture at 200K and 30 bar if the mixture contains 40 mol-% N2.
Generalized correlations for the fugacity coefficient For pure gas or with For pure gas Table E1:E4 or Table E13:E16
Estimate a value for the fugacity of 1-butene vapor at 200°C and 70 bar. and Table E15 and E16 For gas mixture: Empirical interaction parameter Prausnitz et al. 1986
Estimate and for an equimolar mixture of methyl ethyl ketone (1) / toluene (2) at 50°C and 25 kPa. Set all kij = 0.
The ideal solution • Serves as a standard to be compared: cf.
The Lewis/Randall Rule • For a special case of species i in an ideal solution: The Lewis/Randall rule The fugacity coefficient of species i in an ideal solution is equal to the fugacity coefficient of pure species i in the same physical state as the solution and at the same T and P.
Excess properties • The mathematical formalism of excess properties is analogous to that of the residual properties: • where M represents the molar (or unit-mass) value of any extensive thermodynamic property (e.g., V, U, H, S, G, etc.) • Similarly, we have: The fundamental excess-property relation
(1) If CEP is a constant, independent of T, find expression for GE, SE, and HE as functions of T. (2) From the equations developed in part (1), fine values for GE , SE, and HE for an equilmolar solution of benzene(1) / n-hexane(2) at 323.15K, given the following excess-property values for equilmolar solution at 298.15K: CEP=-2.86 J/mol-K, HE = 897.9 J/mol, and GE = 384.5 J/mol From Table 11.1: integration From Table 11.1: integration integration We have values of a, b, c and hence the excess-properties at 323.15K
The excess Gibbs energy and the activity coefficient • The excess Gibbs energy is of particular interest: The activity coefficient of species i in solution. A factor introduced into Raoult’s law to account for liquid-phase non-idealities. For ideal solution, c.f.
Experimental accessible values: activity coefficients from VLE data, VE and HE values come from mixing experiments. Important application in phase-equilibrium thermodynamics.
The nature of excess properties • GE: through reduction of VLE data • HE: from mixing experiment • SE = (HE - GE) / T • Fig 11.4 • excess properties become zero as either species ~ 1. • GE is approximately parabolic in shape; HE and TSE exhibit individual composition dependence. • The extreme value of ME often occurs near the equilmolar composition.