1 / 23

Cache Organization of Pentium

Cache Organization of Pentium. Instruction & Data Cache of Pentium. Both caches are organized as 2-way set associative caches with 128 sets (total 256 entries) There are 32 bytes in a line (8K/256) An LRU algorithm is used to select victims in each cache.

amalia
Download Presentation

Cache Organization of Pentium

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cache Organization of Pentium

  2. Instruction & Data Cache of Pentium • Both caches are organized as 2-way set associative caches with 128 sets (total 256 entries) • There are 32 bytes in a line (8K/256) • An LRU algorithm is used to select victims in each cache.

  3. Structure of 8KB instruction and data cache • Each entry in a set has its own tag. • Tags in the data cache are triple ported, used for • U pipeline • V pipeline • Bus snooping

  4. Data Cache of Pentium • Bus Snooping: It is used to maintain consistent data in a multiprocessor system where each processor has a separate cache • Each entry in data cache can be configured for writethrough or write-back

  5. Instruction Cache of Pentium • Instruction cache is write protected to prevent self-modifying code. • Tags in instruction cache are also triple ported • Two ports for split-line accesses • Third port for bus snooping

  6. Split-line Access • In Pentium (since CISC), instructions are of variable length(1-15bytes) • Multibyte instructions may staddle two sequential lines stored in code cache • Then it has to go for two sequential access which degrades performance. • Solution: Split line Access

  7. Split-line Access

  8. Split-line Access • It permits upper half of one line and lower half of next to be fetched from code cache in one clock cycle. • When split-line is read, the information is not correctly aligned. • The bytes need to be rotated so that prefetch queue receives instruction in proper order.

  9. Instruction & Data Cache of Pentium • Parity bits are used to maintain data integrity • Each tag and every byte in data cache has its own parity bit. • There is one parity bit for every 8 byte of data in instruction cache.

  10. Translation Lookaside Buffers • They translate virtual addresses to physical addresses • Data Cache: • Data cache contains two TLBs • First: • 4-way set associative with 64 entries • Translates addresses for 4KB pages of main memory

  11. Translation Lookaside Buffers • First: • The lower 12 bits addresses are same • The upper 20-bits of virtual address are checked against four tags and translated into upper 20-bit physical address during a hit • Since translation need to be quick, TLB is kept small • Second: • 4 way set-associative with 8 entries • Used to handle 4MB pages

  12. Translation Lookaside Buffers • Both TLBs are parity protected and dual ported. • Instruction Cache: • Uses a single 4-way set associative TLB with 32 entries • Both 4KB and 4MB are supported (4MB in 4KB chunks) • Parity bits are used on tags and data to maintain data integrity • Entries are placed in all 3 TLBs through the use of a 3-bit LRU counter stored in each set.

  13. Cache Coherency in Multiprocessor System • When multiple processors are used in a single system, there needs to be a mechanism whereby all processors agree on the contents of shared cache information. • For e.g., two or more processors may utilize data from the same memory location,X. • Each processor may change value of X, thus which value of X has to be considered?

  14. Cache coherency in multiprocessor Systems • If each processor change the value of the data item, we have different(incoherent) values of X’s data in each cache. • Solution : Cache Coherency Mechanism

  15. A multiprocessor system with incoherent cache data

  16. Cache Coherency • Pentium’s mechanism is called MESI (Modified/Exclusive/Shared/Invalid)Protocol. • This protocol uses two bits stored with each line of data to keep track of the state of cache line.

  17. Cache Coherency • The four states are defined as follows: • Modified: • The current line has been modified and is only available in a single cache. • Exclusive: • The current line has not been modified and is only available in a single cache • Writing to this line changes its state to modified

  18. Cache Coherency • Shared: • Copies of the current line may exist in more than one cache. • A write to this line causes a writethrough to main memory and may invalidate the copies in the other cache • Invalid: • The current line is empty • A read from this line will generate a miss • A write will cause a writethrough to main memory

  19. Cache Coherency • Only the shared and invalid states are used in code cache. • MESI protocol requires Pentium to monitor all accesses to main memory in a multiprocessor system. This is called bus snooping.

  20. Cache Coherency • Consider the above example. • If the Processor 3 writes its local copy of X(30) back to memory, the memory write cycle will be detected by the other 3 processors. • Each processor will then run an internal inquire cycle to determine whether its data cache contains address of X. • Processor 1 and 2 then updates their cache based on individual MESI states.

  21. Cache Coherency • Inquire cycles examine the code cache as well (as code cache supports bus snooping) • Pentium’s address lines are used as inputs during an inquire cycle to accomplish bus snooping.

More Related