1 / 44

Math and Dosage Calculations for Health Care Third Edition Booth & Whaley

Math and Dosage Calculations for Health Care Third Edition Booth & Whaley. Chapter 7: Methods for Dosage Calculations. Learning Outcomes.

amalie
Download Presentation

Math and Dosage Calculations for Health Care Third Edition Booth & Whaley

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Math and Dosage Calculations for Health CareThird EditionBooth & Whaley Chapter 7: Methods for Dosage Calculations McGraw-Hill

  2. Learning Outcomes 7.1 Describe how the information on a physician’s order, medication administration record (MAR), or prescription, along with the drug label and package insert, are used to calculate the desired dose. 7.2 Convert the dosage orderedto the desireddose, using fraction proportion, ratio proportion, or dimensional analysis. McGraw-Hill

  3. Learning Outcomes (cont.) 7.3 Calculate the amount to administerof a drug, using any of the methods of dosage calculation – fraction proportion, ratio proportion, dimensional analysis, or formula. 7.4 Recognize common errors that occur during dose calculations. McGraw-Hill

  4. Introduction • To calculate dosages you will use: • Basic math • Information from the physician’s order • Drug labels • Methods of converting quantities from one unit of measurement to another McGraw-Hill

  5. Dosages and Doses • Desired dose • The amount of the drug to be administered at a single time • To find the desired dose, you must have • The dosage ordered • The dose on hand McGraw-Hill

  6. Dosages and Doses (cont.) • Dosage ordered • The amount of drug ordered and the frequency of administration • Dosage strength • Amount of drug per dosage unit • Medication may be available in different dosage strengths McGraw-Hill

  7. Dosages and Doses(cont.) • Dose on hand • The amount of drug contained within a dosage unit of medication • If a medication has 250 mg of drug per tablet, the dose on hand is 250 mg. • Dosage unit • Tablet, capsule, mL, etc. Both can be found on the label McGraw-Hill

  8. Calculating the Desired Dose • Before calculating the amount to administer, you must first determine the desired dose. • The dosage orderedmay be in different units than found on the label. • The dosage orderedmust be converted into a desired dose having the same units as the dose on hand. McGraw-Hill

  9. Dosage Calculation • Dosage ordered = O • Desired dose = D • Dosage unit = Q • Dose on hand = H • Amount to administer = A • Dosage strength = H/Q

  10. Calculating the Desired Dose (cont.) • Three methods to calculate desired dose • Fraction proportion • Ratio proportion • Dimensional analysis Method used is a matter of choice McGraw-Hill

  11. Calculating the Desired Dose (cont.) Rule 7 - 1 The unit of measurement for the desired dose must be the same as the unit of measurement of the dose on hand before the amount to administer can be calculated. • The dose ordered must be converted into the same unit of measurement as the dose on hand. McGraw-Hill

  12. Fraction Proportion Method Procedure Checklist 3-1 1.Write the conversion factor with the units that you are converting to in the numerator and the units you are converting from in the denominator. 2.Write a fraction with the unknown [?] in the numerator and the number that you need to convert in the denominator. McGraw-Hill

  13. Fraction Proportion Method(cont.) 3. Set the two fractions up as a proportion. 4. Cancel units. 5. Cross multiply, then solve for the unknown value. ?/B = C/D McGraw-Hill

  14. Fraction Proportion Method(cont.) The dosage ordered is 0.2 mg once a day. The dosage strength is 100 mcg/tablet. Find the desired dose. ?/0.2 mg = 1000 mcg/1 mg ?1000 = 0.2 ? = 200 Desired dose = 200 mcg Example

  15. Error Alert! In a fraction proportion, units from the two fractions can be canceled onlywhen they are the same portion of the fraction. Units in the denominator of one fraction cannot be canceled with units found in the numerator of the other. Always include the units when performing calculations. McGraw-Hill

  16. Ratio Proportion Method Procedure Checklist 3-2 1. Write the conversion factor as a ratio A : B so that A has the units of the value that you are converting (the dosageordered) and B has the unit of value of the dose on hand. 2. Write a second C : D so that C is the missing value (desired dose) and D is the number that is being converted (the dosage ordered). McGraw-Hill

  17. Ratio Proportion Method(cont.) 3. Write the proportion in the form A : B :: C : D. Note: When using the ratio proportion method to calculate the desired dose, C indicates the unknown value (desired dose). 4. Cancel units. 5. Solve the proportion by multiplying means and extremes. McGraw-Hill

  18. Ratio Proportion Method (cont.) The order reads: ASA gr v PO daily. The drug label indicates 325 mg tablets. Find the desired dose using 1 gr = 65 mg 65mg:1gr:: C: 5 gr 1 × C = 65 × 5 C = 325 Desired dose is 325 mg Example McGraw-Hill

  19. Error Alert! In a ratio proportion, units can be canceled only when they are found in the same part of each of the ratios. Always include the units when performing calculations. McGraw-Hill

  20. Dimensional Analysis Procedure Checklist 3-3 1. Determine the units of measure for the answer and place it as the unknown on one side of the equation. 2. On the other side of the equation, write a conversion factor with the units of measure for the answer on top and the units you are converting from on the bottom. McGraw-Hill

  21. Dimensional Analysis (cont.) 3. Multiply the conversion factor by the number that is being converted over one. 4. Cancel units on the right side of the equation. The remaining unit of measure on the right side should match the unknown unit of measure on the left side. 5. Solve the equation. McGraw-Hill

  22. Dimensional Analysis (cont.) Find the desired dose for the following: Ordered: Nitrostat 800 mcg sublingually PRN chest pain On hand: Nitrostat 0.4 mg sublingual tablets D mg = 1mg/1000mcg x 800mcg/1 D mg = 800/1000 D mg = 0.8 Desired dose is 0.8 mg Example McGraw-Hill

  23. Error Alert! In dimensional analysis, units can be canceled only when they are found in both the numerator and the denominator of the fraction. Always include the units when performing calculations. McGraw-Hill

  24. Practice Determine the desired dose. Ordered: Penicillin VK 0.25 g On hand: Penicillin VK 500 mg/tablet Desired dose:250 mg McGraw-Hill

  25. Calculating the Amount to Administer Once the desired dose is calculated, the amount to administer must be calculated. McGraw-Hill

  26. Calculating the Amount to Administer (cont.) Rule 7–2To calculate the amount of medication to administer (A), the following information must be known: • The desired dose (D) or the amount of drug to be given at a single time. This is the dosage ordered converted to the same units as the dose on hand. McGraw-Hill

  27. Calculating the Amount to Administer (cont.) Rule 7 - 2 (cont.) • The dosage strength or the dose on hand (H) per the dosage unit (Q) • The dose on hand (H) is the amount of drug contained in a dosage unit. • The dosage unit (Q) is the unit by which you will measure the medication-tablets, capsules, milliliters, teaspoons, etc. (Find this on the medication label). McGraw-Hill

  28. Calculating the Amount to Administer (cont.) Procedure 7-1 Calculating the Amount to Administer by Fraction Proportion: 1. Set up the proportion as follows: dosage unit amount to administer dose on handdesired dose 2. Cancel units. 3. Cross multiply, then solve for the unknown value. McGraw-Hill

  29. Calculating the Amount to Administer (cont.) Ordered: 250 mg IM Dosage strength available: 0.5 g/mL Find the amount to administer. Convert 0.5 gm to milligrams 500 x A = 1mL x 250 Example A 500 = 250mL Amount to administer= 0.5mL McGraw-Hill

  30. Calculating the Amount to Administer (cont.) Procedure 7-2Calculating the Amount to Administer by Ratio Proportion: 1. The proportion will be set up as follows: dosage unit : dose on hand :: amount to administer : desired dose or Q : H :: A : D 2. Cancel units. 3. Multiply the means and extremes then solve for the missing value. McGraw-Hill

  31. Calculating the Amount to Administer (cont.) The dosage ordered is Erythromycin 500 mg PO q 6h On hand: Erythromycin 250 mg tabs Find the amount to administer. D = 500mg Q = 1 tablet H = 250mg 1 tablet : 250mg :: A : 500mg A = 1 tablet x 2 Example Amount to administer = 2 tablets McGraw-Hill

  32. Calculating the Amount to Administer (cont.) Procedure 7-3Calculating the Amount to Administer by Dimensional Analysis: With dimensional analysis you will not need to calculate the desired dose and amount to administer separately. You will place your unknown (amount to administer) on one side of the equation then multiply a series of factors on the right side of the equation. Canceling units will help you determine the equation has been set up correctly. McGraw-Hill

  33. Calculating the Amount to Administer (cont.) Procedure 7-3(cont.): 1. Determine the units of measure for the answer and place it as the unknown on one side of the equation. 2. On the right side of the equation, write a conversion factor with the unit of measure for the desired dose on top and the unit of measure for the dosage ordered on the bottom. If units are different than the dose on hand. McGraw-Hill

  34. Calculating the Amount to Administer (cont.) Procedure 7-3(cont.): 3. Multiply the conversion factor by a second factor – the dosage unit over the dose on hand. 4. Multiply by a third factor - dose ordered over the number one. McGraw-Hill

  35. Calculating the Amount to Administer (cont.) Procedure 7-3(cont.): 5. Cancel units on the right side of the equation. The remaining unit of measure on the right side of the equation should match the unknown unit of measure on the left side of the equation. 6. Solve the equation. McGraw-Hill

  36. Calculating the Amount to Administer (cont.) The order reads: Prozac Liquid 40mg daily On hand: Prozac 20 mg/5 mL Find the amount to administer. D = 40 mg Q = 5 mL H = 20 mg A mL = 200/20 Amount to administer = 10 mL Example McGraw-Hill

  37. Calculating the Amount to Administer (cont.) Procedure 7-4 Calculating Amount to Administer Using the Formula Method: 1. Determine the desired dose. Determine the dose on hand (H) and dosage unit (Q) 2. Fill the formula • D for the desired dose • H for the dose on hand • Q for the dosage unit in the formula • A for the unknown or the amount to administer McGraw-Hill

  38. Calculating the Amount to Administer (cont.) Procedure 7-4(cont.): 3. Cancel the units. 4. Solve for the unknown. McGraw-Hill

  39. Calculating the Amount to Administer (cont.) The dosage ordered is Famvir 500 mg PO q 8 h On hand: Famvir 250 mg/tabs Find the amount to administer. D = 500 mg H = 250 mg Q = tablet 2 x 1 tablet = A 2 tablets = Amount to administer Example McGraw-Hill

  40. Apply Your Knowledge The amount of the drug to be administered at a single time is called the: a. dosage ordered b. dosage unit c. desired dose d. dosage strength McGraw-Hill

  41. Apply Your Knowledge True or False If a medication has 300 mg of drug per tablet, the dose on hand is 300 mg. Answer True McGraw-Hill

  42. Apply Your Knowledge The MAR reads Glucotrol 10 mg PO qd. The desired dose is ____ mg. Answer 10 mg McGraw-Hill

  43. Apply Your Knowledge Calculate the amount to administer. Ordered: Prednisone 10 mg PO qid On hand: Prednisone 5 mg tablets • Answer (Using ratio proportion) • 5 mg : 1 tablet : : 10 mg : ? tablet • 1 x 10 = 5 x ? • ? = 2 • Amount to administer: 2 tablets McGraw-Hill

  44. End of Chapter 7 Each problem that I solved became a rule, which served afterwards to solve other problems. -- Rene Descartes McGraw-Hill

More Related