Download
1 / 100
1k likes | 1.01k Views
A comprehensive study guide covering key concepts in operating systems, including interrupt handling, I/O structure, memory access, and system operations. Learn about computer system organization, interrupts, direct memory access, and more.
E N D
Dr. Dale Parson’s Study Guide for the CSC343 midterm exam on Nov 3, Operating Systems, Fall 2016
Computer System Organization • Computer-system operation • One or more CPUs, device controllers connect through common bus providing access to shared memory • Concurrent execution of CPUs and devices competing for memory cycles
Common Functions of Interrupts • Interrupt transfers control to the interrupt service routine generally, through the interruptvector, which contains the addresses of all the service routines • Interrupt architecture must save the address of the interrupted instruction • Incoming interrupts are disabled while another interrupt is being processed to prevent a lost interrupt • A trap is a software-generated interrupt caused either by an error or a user request • An operating system is interrupt driven
I/O Structure • After I/O starts, control returns to user program only upon I/O completion • Wait instruction idles the CPU until the next interrupt • Wait loop (contention for memory access) • At most one I/O request is outstanding at a time, no simultaneous I/O processing • After I/O starts, control returns to user program without waiting for I/O completion • System call – request to the operating system to allow user to wait for I/O completion • Device-status table contains entry for each I/O device indicating its type, address, and state • Operating system indexes into I/O device table to determine device status and to modify table entry to include interrupt
Direct Memory Access Structure • Used for high-speed I/O devices able to transmit information at close to memory speeds • Device controller transfers blocks of data from buffer storage directly to main memory without CPU intervention • Only one interrupt is generated per block, rather than the one interrupt per byte
How a Modern Computer Works A von Neumann architecture
Multiprocessors • Review Figures 1 and 3 at: • http://faculty.kutztown.edu/parson/spring2012/MultiprocessorJanuary2012Parson.pdf
Operating System Structure • Multiprogramming needed for efficiency • Single user cannot keep CPU and I/O devices busy at all times • Multiprogramming organizes jobs (code and data) so CPU always has one to execute • A subset of total jobs in system is kept in memory • One job selected and run via job scheduling • When it has to wait (for I/O for example), OS switches to another job • Timesharing (multitasking) is logical extension in which CPU switches jobs so frequently that users can interact with each job while it is running, creating interactive computing • Response time should be < 1 second • Each user has at least one program executing in memory process • If several jobs ready to run at the same time CPU scheduling • If processes don’t fit in memory, swapping moves them in and out to run • Virtual memory allows execution of processes not completely in memory
Operating-System Operations • Interrupt driven by hardware • Software error or request creates exception or trap • Division by zero, request for operating system service • Other process problems include infinite loop, processes modifying each other or the operating system • Dual-mode operation allows OS to protect itself and other system components • User mode and kernel mode • Mode bit provided by hardware • Provides ability to distinguish when system is running user code or kernel code • Some instructions designated as privileged, only executable in kernel mode • System call changes mode to kernel, return from call resets it to user
Transition from User to Kernel Mode • Timer to prevent infinite loop / process hogging resources • Set interrupt after specific period • Operating system decrements counter • When counter zero generate an interrupt • Set up before scheduling process to regain control or terminate program that exceeds allotted time
Migration of Integer A from Disk to Register • Multitasking environments must be careful to use most recent value, no matter where it is stored in the storage hierarchy • Multiprocessor environment must provide cache coherency in hardware such that all CPUs have the most recent value in their cache • Distributed environment situation even more complex • Several copies of a datum can exist • Various solutions covered in Chapter 17
System Calls • Programming interface to the services provided by the OS • Typically written in a high-level language (C or C++) • Mostly accessed by programs via a high-level Application Program Interface (API) rather than direct system call use • Three most common APIs are Win32 API for Windows, POSIX API for POSIX-based systems (including virtually all versions of UNIX, Linux, and Mac OS X), and Java API for the Java virtual machine (JVM) • Why use APIs rather than system calls? (Note that the system-call names used throughout this text are generic)
Example of System Calls • System call sequence to copy the contents of one file to another file
System Call Implementation • Typically, a number associated with each system call • System-call interface maintains a table indexed according to these numbers • The system call interface invokes intended system call in OS kernel and returns status of the system call and any return values • The caller need know nothing about how the system call is implemented • Just needs to obey API and understand what OS will do as a result call • Most details of OS interface hidden from programmer by API • Managed by run-time support library (set of functions built into libraries included with compiler)
Types of System Calls • Process control • create process, terminate process • end, abort • load, execute • get process attributes, set process attributes • wait for time • wait event, signal event • allocate and free memory • Dump memory if error • Debugger for determining bugs, single step execution • Locks for managing access to shared data between processes
Types of System Calls • File management • create file, delete file • open, close file • read, write, reposition • get and set file attributes • Device management • request device, release device • read, write, reposition • get device attributes, set device attributes • logically attach or detach devices
Types of System Calls (Cont.) • Information maintenance • get time or date, set time or date • get system data, set system data • get and set process, file, or device attributes • Communications • create, delete communication connection • send, receive messages if message passing model to host name or process name • From client to server • Shared-memory model create and gain access to memory regions • transfer status information • attach and detach remote devices
Types of System Calls (Cont.) • Protection • Control access to resources • Get and set permissions • Allow and deny user access
CHAPTER 3: Process Concept • An operating system executes a variety of programs: • Batch system – jobs • Time-shared systems – user programs or tasks • Textbook uses the terms job and process almost interchangeably • Process – a program in execution; process execution must progress in sequential fashion • A process includes: • program counter • stack • data section • heap (dynamically allocated memory) • PARSON NOTE: In a multithreaded process each thread has its own program counter (a.k.a. instruction pointer), and other CPU registers such as Stack Pointer and Frame Pointer.
Process (or Thread!) State • As a process (or thread) executes, it changes state • new: The process is being created • running: Instructions are being executed • waiting: The process is waiting for some event to occur • ready: The process is waiting to be assigned to a processor • terminated: The process has finished execution
Process Control Block (PCB) Information associated with each process • Process state • Program counter (PER THREAD) • CPU registers (PER THREAD) • CPU scheduling information (PER THREAD) • Memory-management information • Accounting information (PER PROCESS & THREAD) • I/O status information (PER PROCESS & THREAD)
Process Scheduling Queues • Job queue – set of all processes in the system • Ready queue – set of all processes residing in main memory, ready and waiting to execute • Device queues – set of processes waiting for an I/O device • Processes migrate among the various queues
Schedulers • Long-term scheduler(or job scheduler) – selects which processes should be brought into the ready queue • Short-term scheduler(or CPU scheduler) – selects which process (thread!) should be executed next and allocates CPU
Representation of Process Scheduling • Queueing diagram represents queues, resources, flows
Schedulers (Cont) • Short-term scheduler is invoked very frequently (milliseconds) (must be fast) • Long-term scheduler is invoked very infrequently (seconds, minutes) (may be slow) • The long-term scheduler controls the degree of multiprogramming • Processes can be described as either: • I/O-bound process– spends more time doing I/O than computations, many short CPU bursts • CPU-bound process– spends more time doing computations; few very long CPU bursts
Context Switch • When CPU switches to another process, the system must save the state of the old process and load the saved state for the new process via a context switch • Context of a process represented in the PCB • Context-switch time is overhead; the system does no useful work while switching • Time dependent on hardware support
Process Creation • Parent process create children processes, which, in turn create other processes, forming a tree of processes • Generally, process identified and managed via a process identifier (pid) • Resource sharing • Parent and children share all resources • Children share subset of parent’s resources • Parent and child share no resources • Execution • Parent and children execute concurrently • Parent waits until children terminate
Process Termination • Process executes last statement and asks the operating system to delete it (exit) • Output data from child to parent (via wait) • Process’ resources are deallocated by operating system • Parent may terminate execution of children processes (abort) • Child has exceeded allocated resources • Task assigned to child is no longer required • If parent is exiting • Some operating system do not allow child to continue if its parent terminates • All children terminated - cascading termination
Interprocess Communication • Processes within a system may be independent or cooperating • Cooperating process can affect or be affected by other processes, including sharing data • Reasons for cooperating processes: • Information sharing • Computation speedup • Modularity • Convenience • Cooperating processes need interprocess communication (IPC) • Two models of IPC • Shared memory • Message passing
Benefits • Responsiveness • Resource Sharing • Economy • Scalability
CH5: Race Condition & Deadlocks • Results of execution and possible bugs depend on relative timing of threads interacting in a critical section. • A critical section comprises regions of code that interact over a shared, non-atomic data set.
Solution to Critical-Section Problem 1. Mutual Exclusion - If process Pi is executing in its critical section, then no other processes can be executing in their critical sections 2. Progress - If no process is executing in its critical section and there exist some processes that wish to enter their critical section, then the selection of the processes that will enter the critical section next cannot be postponed indefinitely 3. Bounded Waiting - A bound must exist on the number of times that other processes are allowed to enter their critical sections after a process has made a request to enter its critical section and before that request is granted • Assume that each process executes at a nonzero speed • No assumption concerning relative speed of the N processes
