1 / 32

KEYTROLLER Wireless Relay Anti-theft Devices

KEYTROLLER Wireless Relay Anti-theft Devices. Your equipment is: easy to steal + easy to dispose of!. Equipment theft rates have reached an all time high, costing construction industry almost $1 billion annually!!

anika-combs
Download Presentation

KEYTROLLER Wireless Relay Anti-theft Devices

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KEYTROLLER Wireless Relay Anti-theft Devices

  2. Your equipment is: easy to steal + easy to dispose of! • Equipment theft rates have reached an all time high, costing construction industry almost $1 billion annually!! • Incidents of stolen equipment have increased about 20% every year since 1996! • Unlike cars, equipment is relatively easy to “unload” on the used market---making it an attractive product to steal • Equipment is commonly left on secluded job sites and quick hot wiring or universal ignition keys help thieves move the equipment quickly

  3. Equipment theft statistics(by state and age of vehicle)courtesy www.nerusa.com • 2005 • 1. TX • 2. CA • 3. FL • 4. MO • 5. SC • 6. NC • 7. GA • 8. TN • 9. IN • 10. OK • 1. 2004 19 % • 2. 2003 15 % • 3. 2005 14 % • 4. 2000 10 % • 5. 2002 7 % • 6. 2001 6 % • 7. 1999 6 % • 8. 1998 6 % • 9. 1997 3 % • 10. 1996 3 %

  4. Equipment theft statistics (by vehicle type) • Skid Steer 32% • Tractor 16% • Backhoe 15% • Loader 9% • Excavators 6% • Based on 5,105 theft reports submitted to NER in 2005. • The top 5 types of equipment account for 78% of all losses. • ‘Tractor’ is a broad category, including compact, utility and agricultural tractors. • The two key factors in the type of equipment most likely to be stolen are value and mobility - the higher the value of an item and the easier it is to transport, the greater the chance of theft.

  5. Theft Compared to Other Risks • Theft is by far the largest risk an equipment owner faces---far surpassing: • Collision • Fire Damage • Vandalism • Other ----*windstorms, hail, water damage, flood, and earthquakes • Theft is not only the most frequent loss, but also the risk that a good risk management program can have the greatest effect on reducing. This means that there is a great difference in the level of risk between an equipment owner that takes certain key theft prevention precautions and one that does nothing to protect his equipment. • There are simple steps that equipment owners can take to reduce the likelihood of theft and improve the chances of recovery. Installation of a KEYENABLERis one of the simplest, easiest and cost effective theft prevention you and use to protect your equipment

  6. All models work on any make, model construction vehicle Models available in keypad, card or fob configurations Wireless relays for 12 or 24VDC vehicles Anti-theft protection for ANY equipment

  7. KEYENABLERKeypad or RFID card wireless relay enabler/logger • Available with upgradeable basic keypad Model KN105B • Upgradeable to external shock/memory (SM) module or internal (IM) for time stamped event logging, impact, engine and speed sensing, RS232 serial port Model KN105B-SM or KN105B-IM • Code entry is standard---RFID card reader upgrade is optional • Comes with wireless relay or with BOTH wired and wireless relays • Optional Piezo Metal keypad for rugged outdoor or high usage applications

  8. START-SMARTOutdoor rugged sealed metal keypad systems w/wireless relays • Available versions: • Model SSO-WWL---BOTH wired and wireless relays • Operation: • Good code is entered • Wireless relay is immediately enabled • Start/Stop engine from keypad button---NO KEYS! • Model SSO-WL ---- wireless relay ONLY • Operation: • Good code is entered • Wireless relay is immediately enabled • Driver starts/stops engine from ignition key or lever switch • This simple device can NOT be upgraded to include advanced event logging features. If you want this, refer to KEYTROLLER Model 105 • Code entry is standard--RFID card reader NOT available • Piezo metallic keypad designed for very rugged usage • NO moving parts • Weatherproof—waterproof---dust proof • Virtually indestructible, highly reliable • Kit includes: • Sealed metal piezo keypad • Wireless relay (wired relay also included in WWL version)

  9. KISS –NO Button VersionKeyless Ignition Simple Starter w/wireless relay • Includes only wireless relay Model KISS-SWL (Std RFID) Model KISS-HWL (HID RFID) • Operation: • Operator flashes RFID card over reader in dash  • LED in dash lights GREEN the wireless relay is automatically enabled.  RED if NOT accepted • Use ignition key (or lever switch in place of ignition key) to START/STOP the vehicle. • Available with time stamped event logging, impact, engine and speed sensing, RS232 serial port Models KISS-SWLM KISS-HWLM • LED Piezo button standard---“Ring” LED piezo optional • Kit Includes: • LED indicator light for mounting in dash • Wireless relay (specify 12 or 24 VDC) • RFID card reader (specify type) • PCB “brain” box

  10. KISS –Illuminated Button VersionKeyless Ignition Simple Starter w/wireless + wired relays • Includes BOTH (w/wireless + wired relays) Model KISS-SLWWL (Std RFID) Model KISS-HLWWL (HID RFID) • Operation: • Operator flashes RFID card over reader in dash  • LED in Piezo button lights GREEN, the wireless relay is automatically enabled.   RED if NOT accepted • Press button to START/STOP the vehicle. The Ignition Key is Eliminated • OR with time stamped event logging, impact, engine and speed sensing, RS232 serial port Models KISS-SLWWLM KISS-HLWWLM • LED Piezo button standard---“Ring” LED piezo optional • Kit Includes: • Piezo START/STOP ignition button (specify type) • BOTH Wired and wireless relays (specify 12 or 24 VDC) • RFID card reader (specify type) • PCB “brain” box

  11. KISS –Illuminated Button Version + Genie CardKeyless Ignition Simple Starter w/wireless + wired relays • Includes BOTH (w/wireless + wired relays) Model KISS-GLWWL (Genie powered RFID card) • Operation: • Operator walks toward vehicle with Genie card in pocket  • LED in Piezo button lights GREEN, the wireless relay is automatically enabled.   RED if NOT accepted • Press button to START/STOP the vehicle. The Ignition Key is Eliminated • NOT available with time stamped logging option • LED Piezo button standard---“Ring” LED piezo optional • Kit Includes: • Piezo START/STOP ignition button (specify type) • BOTH Wired and wireless relays (specify 12 or 24 VDC) • Genie Card powered RFID card • PCB “brain” box • Can also be used to automatically lock/unlock doors in delivery vans along with automatically enabling/disabling the ignition system

  12. Why use a KEYENABLER. KISS or START-SMART device? • Easy theft prevention • Vehicle can’t be “hot wired” at ignition key • Vehicle can NOT be started with another key that works on your vehicle • Keeps untrained and unauthorized operators from starting the vehicle (Each operator has is own code/card) • NO KEYS!! (Start directly from keypad button) • Data on usage of vehicle and code/card expiration (optional)

  13. Why a wireless relay? • Prevents “hot wiring” theft at ignition key • Prevents using a “good” key if not a “good” driver • Unsuccessful thieves will give up and move on to easier target • Easy to install in ignition, starter or fuel pump circuit • Multiple wireless relays can be used for higher security and enabled by the same device • Can be ordered in both 12 or 24VDC versions • Inexpensive theft PREVENTION for all equipment

  14. Wireless RelaysCan be installed on ANY vehicle! • Available with 12 and 24VDC wireless relays • Wireless relay installation • Wired between ignition circuit and power supply • Wired between fuel pump and power supply • Wired between starter and power supply • Multiple wireless relays can be installed for higher level of security

  15. Easy Installation • Wireless relay is installed in ignition, starter or fuel pump circuit preventing start of the vehicle unless it is wirelessly enabled by any of our various anti-theftdevices. • KEYENABLER, START-SMART and KISS models are wired to vehicle power, FOB and Genie units are battery powered and carried in the operator’s pocket.

  16. Eliminate key problems!! • Keys can be completely ELIMINATED! • Buying system with BOTH wired and wireless relays • Buying wireless relay version and replacing key switch with lever switch • START button or lever switch will NOT start the vehicle until the wireless relay is first enabled by the keypad! • Many pieces of construction equipment can use the SAME key to start the vehicle—many times stolen equipment is not hotwired, simply started with another key that also works with that vehicle. KEYENABLER, START-SMART and KISS units eliminate this easy method of stealing equipment.

  17. KEYENABLERKeypad Model KN105B • How it works: • Keypad is programmed from keypad with programming code---entering 4 digit codes or RFID card (optional) IM or SM models programmed by computer through serial port connection • “Good” code or RFID card is entered---keypad LEDs show acceptance and START is pressed • Wireless signal is sent to wireless relay---enabling it • Engine is started/stopped with: • Dual relay model • Pressing START/STOP button on keypad • Wireless relay only model • Turning key or lever switch in place of key • Events art time/date stamped (IM or SM models only) for downloading by computer, CYBERKEY or CYBERWIRE wireless radio • Available in 12 or 24 volt anti-theft models

  18. RFID card reader optionsModel KNS/H105B • RFID card reader options • S model Standard card reader • H model HID-Prox card reader • Use your company ID card to enable the device! * It is recommended you send an RFID card to Keytroller to evaluate to insure it works properly with the model you choose **RFID card reading is NOT available with flush mounting option

  19. KEYENABLERKeypad Model KN105B-IM • OPTIONAL MEMORY • IM model has internal real time clock, and serial port for programming/downloading • Event data that is recorded • Time • Date • Vehicle • Operator • Start • Stop • Hour meter usage

  20. KEYENABLER Keypad Model KN105B-IM • Downloading + programming • IM model: • From Keypad • From serial port connection to computer • From serial port connection to CYBERKEY—memory key • From serial port connection to CYBERKEY– wireless radio

  21. CYBERKEYQuick Data Transfer System for KEYENABLER • Handheld Device—no need for computer connection • Includes: Red Box, Blue Box and 1028k key • Downloads Logged Data to Memory Chip • Upload Clone file to change embedded codes and settings • Plugs into PC/laptop • 16,000 events recorded • Entire fleet downloaded at one time to one key with Blue Box. • After download, the lift is cleaned to zero events • Key returned to PC where Red Box is connected to serial port of PC---log uploaded to KEYSOFT program for filtering and graphing • Data log can be exported in Access for additional manipulation of data

  22. Programming operator codes and settingsDownloading event log data • Can be done from the keypad, with a laptop, long connection to PC, Cyberkey memory key or Cyberwire wireless connection. • IM Model only • Easy to learn, demo and program with desktop plug in transformer connection

  23. CYBERWIRE2.4ghz Wireless radio • Vehicle to host PC communication • Both download event data and upload new codes and settings • Up to 1000’ range indoors—up to 4000’ outdoors • Ethernet “wired” radio mounted within the warehouse can significantly increase range • Easy set up • Search mode automatic poling • Weatherproof design with indicator LEDs • Simply plugs into KEYENABLER or KISS serial port---receives power from device

  24. KEYSOFT PC SOFTWAREUsed on KEYENABLER and KISS devices with memory • Programmable features: • Sync clock/date • Pick com port • Hour meter setting and maintenance limit • Maintenance due date • Maintenance grace period (hours or days) • Impact threshold X—Y---Duration (Keyenabler) • Speed threshold and grace period (Keyenabler) • Disable ignition after no movement (minutes) • Disable ignition after impact event (seconds) • User and vehicle ID set up with expiration date • Event log, filtering, graphing • Seat switch timeout setting • Oil pressure, water temp disable ignition setting • Allow alarms or logging • Create clone (codes and settings) file • Read, write to and format Cyberkey • Cyberwire wireless radio settings and IDs • Filter and graph event log data

  25. Evaluating Event Log DataKeypad model only Event logs can be filtered by time, date, operator, vehicle, event and deleted or exported to Access or Excel for further manipulation

  26. ADVANTAGES + DISADVANTAGES KEYPAD/Button vs FOB/Card styles Advantages of keypad model vs FOB/Card styles • Each operator gets his own code or RFID card---keeping untrained and unauthorized operators from starting vehicle • Device stays on the machine---no chance to loose a FOB or Card • Multiple configurations---box keypad, flush keypad, double keypad, Illuminated Piezo button, metal outdoor piezo keypad • Mechanic’s lock out code can easily lock out users, preventing usage of the vehicle. • Optional memory provides you with data on operator usage and utilization of the vehicle (Keyenabler and Kiss only) • Dual keypads available for multiple controls (like truck cranes—see schematics) • Designed for very tough, very abusive applications (like freezers, foundries, etc) Available with impact abuse sensor option Disadvantages of keypad model vs FOB/Card styles • More expensive • Must have codes/RFID cards programmed into it

  27. ADVANTAGES + DISADVANTAGES FOB/Card vs KEYPAD/Button styles Advantages of FOB/Card models vs KEYPAD/Button styles • Less expensive • Available in Genie Card or keychain FOB configurations • Simple easy, theft prevention • FOB/Card stays with the operator, no chance of vandalism Disadvantages of FOB/Card models vs KEYPAD/Button styles • If operator forgets FOB/Card, he can NOT start vehicle • Any operator with a “trained” FOB/Card can start vehicle irregardless of whether the operator is trained or not • Only 4 FOBS/Cards can be “trained” into each wireless relay • There is NO event logging available

  28. GENIE CARDBattery powered RFID card Model GENIE-LV/MV • Motion activated card--carried in operator’s pocket or wallet • Walking to within range automatically activates wireless relay • After wireless relay is activated, you start engine with key or lever switch • Up to 4 different GENIE cards can be “trained” into each wireless relay • Card will “sleep” if it feels NO motion, saving battery life • 2 batteries included in each card • 1 for powering card • 1 for reserve • Batteries last 4-6 months

  29. Keychain FOB Model FOB-LV • FOB carried in operator’s pocket or wallet • Walking to within range press FOB button activates wireless relay • After wireless relay is activated, you can start engine with key or lever switch • Up to 4 different fobs can be “trained” into each wireless relay • Only available with 12VDC wireless relay • Inexpensive protection from theft • Kit includes: • 1) FOB (battery powered) • 1) Wireless 12VDC wireless relay

  30. Easy Theft Prevention! • Stopping thieves from “hot wiring” or starting your equipment with a common key will force them to: • Look for an easier target • Prevents “joyriding” and vandalism Piece of mind knowing your equipment is protected! CHOOSE KEYTROLLER Anti-theft devices THE EASY WAY TO PROTECT YOUR FLEET!

  31. Sold by most progressive equipment dealersFits to ANY equipment!

  32. KEYTROLLER, LLC.The Company • Full line of award winning equipment safety devices • Over 400 equipment dealers for local representation and support • OEM installation of devices available • Over 10,000 devices installed in the field • All models designed to install on any gas, diesel or electric powered vehicles • Keytroller devices designed in house • Manufactured and/or distributed from Tampa, Fla www.keytroller.com 813-877-4500 info@keytroller.com

More Related