1 / 6

R&D status of TiCAL at Korea

R&D status of TiCAL at Korea. 2004/2/21 Calorimeter meeting. Donghee Kim Youngdo Oh Kyungpook National University. Overview of Current Status. Survey almost done SiPM fabrication, Scintillator, W/W-Ni SiPM/Tile R&D has been just started Simulation is going on New collaborators

anja
Download Presentation

R&D status of TiCAL at Korea

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. R&D status of TiCAL at Korea 2004/2/21 Calorimeter meeting Donghee Kim Youngdo Oh Kyungpook National University

  2. Overview of Current Status • Survey almost done • SiPM fabrication, Scintillator, W/W-Ni • SiPM/Tile R&D has been just started • Simulation is going on • New collaborators • Seoul National University : Prof. Soobong Kim • SungKyunKwan University : Prof. Intae Yu

  3. R&D status and plan • SiPM • Preparation design and process during next semester • - simulation of electric field in Geiger and drift region • - wafer and mask • - fabracation process • Try to make sensor chip using FAB facility at ETRI. • ETRI : Electronics and Telecommunications Research Institute • Scintillator • The 1st scintillator bars for R&D purpose expect to be produced • during next semester • Make sure right chemical procedure • Compare light yield with existed scintillator bar • Design of scintillator for LC prototype will be underway • Simulation • 4 cpu (43GHz) and 1.2TB RAID storage allocated. • Mokka and susygen 3.0 installed • SUSY simulation under Mokka • neutralino pair production from e+e- collision • Simulation of prototype started

  4. Simulation of TiCAL prototype using Geant4 • Structure Absorber : 200mm * 200mm * 3mm Scintillator : 200mm * 200mm * 2mm (We simulated plate, not strip yet)  30 layers ( ~26 X0 ) • Absorber pure W ( density = 19.3g/cm3) : simulaion done alloy W-Ni (W:Ni = 95:5) (density=18.7g/cm3) : simulation done alloy W-Pb (W:Pb = 90:10) (density=18.5g/ cm3) : simulation going on • Effective Molier Radius from Simulation W : ~18.9mm W-Ni : ~19mm : almost the same

  5. Energy Resolution % % W-Ni W Energy(GeV) Energy(GeV) • Electron energy = 1, 5, 10, 20, 50, 80, 100, 200 GeV • Cut range : 0.001 mm W : (15.2  0.3)/sqrt(E) + (0.13  0.12) W-Ni : (13.4  0.7)/sqrt(E) + (0.16  0.29) W-Ni’s energy resolution is better than W’s in region. : W-Ni is less dense, so more energy is deposited in scintillator

  6. What to do : next simulation • Simulation for the thickness of scintillaor = 25 , 30mm Simulation for alloy with different ratio for W:Pb and W:Ni  Optimize the ratio of thickness for Absorber and Scin and absorber material. • Simulation for scintillator strip • Jupiter and Physics simulation Possible target for physics simulation is SUSY - parameter scan - produce generator data in format of HEPEVT

More Related