50 likes | 69 Views
So letu2019s get started with the procedure of canon pixma wireless setup and in detail so here are the steps to set up the canon pixma printer.<br>
E N D
The first step is to turn in your Canon PIXMA MG3022 printer. • Now you need to check the power button. If it is green, it means that the printer is on for the canon pixma mg3022 wireless setup. • The next step is to press the setup button on your printer for the wireless process. • After the above steps select the wireless LAN setup.
Now you need to click on OK button. • After that, the wireless connection is on if the blue wifi lights blink on your canon pixma. • The next one is to wait for a minute, the printer is looking for the well-suited device to get the right entry access to the device. • Now you will observe that your printer display, pick out the best approach which suits you for the canon pixma mg3022 wireless setup.
The next step is to press the stop button if the push button method screen seemed for your printer, however, if you are not ready approximately the access factor or the router. • Well now to begin the wi-fi setup, it is will take some time as your net connection might be unavailable at some stage in the setup. • Once you are done with the above steps now you need to run the print test to check whether your printer is well connected with the wireless setup if all goes good then you are done with the setup!!
For More Visit - 877-200-8067 https://www.setupcanonprinter.com/blog/canon-pixma-mg3022-setup/